Location map of South East Queensland
name South East Queensland
border
coordinates
-25.74
151.73 ←↕→ 153.73
-28.74
map center 27°14′S 152°44′E / 27.24°S 152.73°E / -27.24; 152.73
image SEQ location map.svg
image1 400px-SEQ_location_map.svg.png
ගොනුව:400px-SEQ location map.svg.png
Map of councils in the South East Queensland Region

Module:Location map/data/Australia Queensland SEQ is a location map definition used to overlay markers and labels on an equirectangular projection map of South East Queensland. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Australia Queensland SEQ":

Map definition

  • name = South East Queensland
    Name used in the default map caption
  • bottom = -28.74
    Latitude at bottom edge of map, in decimal degrees
  • left = 151.73
    Longitude at left edge of map, in decimal degrees
  • right = 153.73
    Longitude at right edge of map, in decimal degrees

Alternative map

The map defined as image1 (400px-SEQ_location_map.svg.png) can be displayed by using the relief or AlternativeMap parameters in {{Location map}}, {{Location map many}} and {{Location map+}}. The use of these two parameters is shown in the examples below. Additional examples can be found at:

Precision

Longitude: from West to East this map definition covers 2 degrees.

  • At an image width of 200 pixels, that is 0.01 degrees per pixel.
  • At an image width of 1000 pixels, that is 0.002 degrees per pixel.

Latitude: from North to South this map definition covers 3 degrees.

  • At an image height of 200 pixels, that is 0.015 degrees per pixel.
  • At an image height of 1000 pixels, that is 0.003 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

 
 
Mooloolaba
Mooloolaba (South East Queensland)
{{Location map | Australia Queensland SEQ
| width   = 200
| lat_deg = -26.6819
| lon_deg = 153.1177
| label   = Mooloolaba
}}

Mooloolaba is still too far south in the map. dangnabbit I thought I fixed the coords of the map. Southport seems more accurate, but I think it still may be off. Too far... south, but only slightly??? Actually, Mooloolaba may be fine - I think I was mistaking where it should be with "Noosa Heads" (still sunshine coast LGA)

Location map many

{{Location map many | Australia Queensland SEQ
| width    = 200
| caption  = Two locations in South East Queensland
| lat1_deg = -26.6819
| lon1_deg = 153.1177
| label1   = Mooloolaba
| lat2_deg = -27.9736
| lon2_deg = 153.4047
| label2   = Southport
}}

something is wrong, the whole map doesn't show up

Location map+

 
 
Mooloolaba
 
Southport
Two locations in South East Queensland
{{Location map+ | Australia Queensland SEQ
| width   = 200
| caption = Two locations in South East Queensland
| places  =
  {{Location map~ | Australia Queensland SEQ
  | lat_deg = -26.6819
  | lon_deg = 153.1177
  | label   = Mooloolaba
  }}
  {{Location map~ | Australia Queensland SEQ
  | lat_deg = -27.9736
  | lon_deg = 153.4047
  | label   = Southport
  }}
}}

See also

Location map templates
Infobox templates incorporating (passing values to) the Location map template
List


"https://si.wikipedia.org/w/index.php?title=Module:Location_map/data/Australia_Queensland_SEQ/doc&oldid=641558" වෙතින් සම්ප්‍රවේශනය කෙරිණි