සැකිල්ල:Location map+

සැකිලි ප්‍රලේඛනය[නරඹන්න] [සංස්කරණය] [ඉතිහාසය] [විරේචනය]

මෙම සැකිල්ල පිටු 20,000 පමණ භාවිතා වන නිසා සිදුකරන වෙනස් කිරීම් බොහෝ ස්ථානවලට බලපානු ඇත. ඔබ සිදුකිරීමට අදහස් කරන වෙනස්කම් මෙම සැකිල්ලට අදාළ /sandbox හෝ /testcases උපපිටුවල, හෝ ඔබගේ පරිශීලක උපපිටුවේ පළමුව සිදුකොට පරීක්ෂාකර බලන්න. එම වෙනස්කම් සිදුකිරීමට ප්‍රථම අදාළ සාකච්ඡා පිටුවේ ඒ පිළිබඳව සංවාදයක් ගොඩනැගීමට කාරුණික වන්න.

Transclusion count updated automatically (ප්‍රලේඛනය වෙතට යොමුවන්න).

මෙම සැකිල්ල ලුවා භාවිතා කරයි:

Module:Location map/multi (sandbox)

Bosworth

Berwick

London

York

Plymouth

Poole

Wem

Northumberland

Shrewsbury

Milford Haven

class=notpageimage|

Battle of Bosworth Field

other battles

{{Location map+}} places one or more location marks on a map, with optional labels. It is in the same family of templates as the Location map template and the documentation for that template might be helpful.

Template:Location map+ uses a helper template, {{Location map~}}, one or more times to generate a mark for each location.

Usage

{{Location map+
| {{{1}}}
| width          =
| float          =
| border         =
| caption        =
| alt            =
| relief         =
| AlternativeMap =
| overlay_image  =
| places         =
}}

{{Location map~
| {{{1}}}
| label      =
| label_size =
| position   =
| background =
| mark       =
| marksize   =
| link       =
| lat_deg    =
| lat_min    =
| lat_sec    =
| lat_dir    =
| lon_deg    =
| lon_min    =
| lon_sec    =
| lon_dir    =
}}

Parameters

Parameters for Location map+
Parameter	Description
`{{{1}}}`	Required. Use the name of the map as the first unnamed parameter. For example, specifying England will use the values for England in Module:Location map/data/England if it exists, or `{{Location map England}}` otherwise. See the examples below.
`width`	Determines the width of the map in pixels, overriding any default values. Do not include `px`, for example: `width=300`, not `width=300px`.
`default_width`	Determines the default width of the map in pixels, intended for use by templates e.g. place infoboxes. The default value is 240. Do not include `px`. This value will be multiplied by the `defaultscale` parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. For example, if `default_width=200` is given, a map of Thailand will be displayed with a width of 200 * 0.57 = 114 pixels (as specified in Module:Location map/data/Thailand).
`float`	Specifies the position of the map on the page. Valid values are `left`, `right`, `center` and `none`. The default is `right`.
`border`	Specifies the color of the 1px map border. The default is lightgrey (see web colors). If set to `none`, no border will be generated. This parameter is seldom used.
`caption`	The text of a caption to be displayed below the map. Specifying a caption will cause the map to be displayed with a frame. If `caption` is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If `caption` is not defined, the map will not be framed and a default caption will be generated. The default caption is created from the `label` parameter (or the current page name if label not defined) and the `name` parameter from map definition template. See the examples below.
`alt`	Alt text for map; used by screen readers, see WP:ALT.
`relief`	Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as `image1`, which is usually a relief map. See the example at Location map+/relief.
`AlternativeMap`	Allows the use of an alternative map. The image must have the same edge coordinates as the location map template. See the example at Location map+/AlternativeMap.
`overlay_image`	Allows an overlay to be superimposed on the map. This parameter is seldom used. See the example at Location map+/overlay.
`places`	Specifies one or more place markers using `Location map~`.

Parameters for Location map~
Parameter	Description
`{{{1}}}`	Required. Use the name of the map as the first unnamed parameter. For example, specifying England will use the values for England in Module:Location map/data/England if it exists, or `{{Location map England}}` otherwise. See the examples below.
`label`	The text of the label to display next to the mark. A wiki link can be used. The default if not specified is no label, just the marker. Do not use `<div>...</div>` tags to attempt to position the label; use `\|label_size=` and `\|position=` instead.
`label_size`	The font size to use for the label, given as a percentage of the label's (already reduced) normal font size (<100 = smaller, >100 = larger). The default is 91; do set lower than 91, per . Do not include `%`, for example: `label_size=95`, not `label_size=95%`. If set to 0, the label is displayed only when the user hovers over the mark.
`position`	The position of the label relative to the mark. Valid values are `left`, `right`, `top` and `bottom`. The default is `right`.
`background`	The background color to use for the label. See Web colors. The default is no background color, which shows the map image behind the label.
`mark`	The name of an image to display as the mark. The default is Red pog.svg (). See examples at Commons:Location markers and Commons:Category:Map icons.
`marksize`	The size of the mark in pixels. The default is 8. Do not include `px`, for example: `marksize=10`, not `marksize=10px`.
`link`	Specifies a wiki link which will be followed if the reader clicks on the mark. Do not include `[[]]`, for example: `link=Yellowstone National Park`, not `link=[[Yellowstone National Park]]`.
`lat_deg`	Required. The degrees of latitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified.^{[Note 1]}
`lat_min`	The minutes of latitude.^{[Note 1]} The sign should match that of lat_deg.
`lat_sec`	The seconds of latitude. Usually not necessary.^{[Note 1]} The sign should match that of lat_deg.
`lat_dir`	N if north (default value) or S for south of the Equator. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for southern latitude).
`lon_deg`	Required. The degrees of longitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified.^{[Note 1]}
`lon_min`	The minutes of longitude.^{[Note 1]} The sign should match that of lon_deg.
`lon_sec`	The seconds of longitude. Usually not necessary.^{[Note 1]} The sign should match that of lon_deg.
`lon_dir`	E for east (default value) or W for west of the Prime Meridian. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for western longitude).

Notes:

^ ^a ^b ^c ^d ^e ^f Appropriate precision should be used. For example, the whole US map, with a 1000-pixel width, has a resolution of about 5km/pixel. Only 2 decimal places of precision in decimal degrees (~1km), or whole minutes (~1.7km) in DMS format, are required.

Available maps

Location maps can be found using these sources:

Special:PrefixIndex/Module:Location map/data/ - Checked before a map template is searched for. New maps should be created here rather than creating new templates.

List of templates - 1050 templates available when the list was generated.

Category:Location map templates - templates sorted by category.

Special:WhatLinksHere/Template:Location map/Info - a search that might help.

Special:Prefixindex/Template:Location map - another search that might help.

Examples

This example does not designate the caption parameter. It demonstrates the use of the defaults. Notice that the default caption is the page name followed by the map name in parenthesis and that the label position is automatically adjusted if it is too close to an edge.

Sydney

Melbourne

Location map+ (Australia)

{{Location map+ | Australia
| places =
  {{Location map~ | Australia
    | label = Sydney
    | lat_deg = -33.86
    | lon_deg = 151.21 }}
  {{Location map~ | Australia
    | label = Melbourne
    | lat_deg = -37.81
    | lon_deg = 144.96 }}
}}

This example uses a designated but empty caption. It demonstrates coordinates using decimal degrees and a 10px mark with a link.

Paris

Marseille

{{Location map+ | France
| caption =
| places =
  {{Location map~ | France
    | label = Paris
    | position = top
    | marksize = 10
    | link = Paris
    | lat_deg = 48.8567
    | lon_deg = 2.3508
  }}
  {{Location map~ | France
    | label = Marseille
    | position = top
    | marksize = 10
    | link = Marseille
    | lat_deg = 43.2964
    | lon_deg = 5.3610
  }}
}}

This example uses caption with an assigned value. It demonstrates coordinates in degree, minute, second format, a relief map, label background color and linked labels.

New York

San Francisco

class=notpageimage|

Some cites in the United States

{{Location map+ | USA
| width = 300
| caption = Some cites in the United States
| relief = 1
| places =
  {{Location map~ | USA
    | label = [[New York City|New York]]
    | position =
    | background = white
    | mark = Cyan pog.svg
    | alt = alt text for New York City
    | link = New York City
    | lat_deg = 40 | lat_min = 43 | lat_dir = N
    | lon_deg = 74 | lon_min = 0  | lon_dir = W
  }}
  {{Location map~| USA
    | label = [[San Francisco]]
    | position =
    | background = white
    | mark = Purple pog.svg
    | alt = alt text for San Francisco
    | link = San Francisco
    | lat_deg = 37  | lat_min = 46 | lat_dir = N
    | lon_deg = 122 | lon_min = 25 | lon_dir = W
  }}
}}

Also see the examples for {{Location map}} and {{Location map many}}, as well as:

Template:Location map+/relief, an example using the relief parameter
Template:Location map+/AlternativeMap, an example using the AlternativeMap parameter
Template:Location map+/overlay, an example using the overlay_image parameter

Template data

TemplateData documentation used by VisualEditor and other tools
Click here to see a monthly parameter usage report for this template based on this TemplateData. TemplateData for Location map+ සැකිල්ල:Location map+/TemplateData