Module:Params
This module is rated as beta, and is ready for widespread use. It is still new and should be used with some caution to ensure the results are as expected. |
The {{#invoke:params}}
module is designed to be adopted by those templates that want to have a deep control of their parameters. It is particularly useful to variadic templates, to which it offers the possibility to count, list, map and propagate the parameters received without knowing their number in advance.
The module offers elegant shortcuts to non variadic templates as well. Outside templates it has virtually no applications; hence, if you plan to make experiments, make sure to do them from within a template, or you will not be able to see much. Under ./testcases you can find helper templates that can be specifically used for testing the module's capabilities in flexible ways (see in particular the {{./testcases/tmulti}} template).
Note: In case your template uses this module, please add {{lua
General usage
සංස්කරණයAmong the possibilities that the module offers there is that of performing a series of actions after novel arguments have been concatenated to templates' incoming parameters. As this makes it necessary to keep the argument slots clean from interference, instead of named arguments in order to specify options this module uses piping functions (i.e. functions that expect to be piped instead of returning to the caller), or modifiers. This creates a syntax similar to the following example:
{{#invoke:params|[modifier]|[...]|[modifier]|[...]|function|[...]}}
For instance, as the name suggests, the list
function lists the parameters wherewith a template was called. By default it does not add delimiters, but returns an indistinct blob of text in which keys and values are sticked to each other. However, by using the setting
modifier, we are able to declare a key-value delimiter (p
) and an iteration delimiter (i
). And so, if we imagined a template named {{Example template}}
containing the following wikitext,
{{#invoke:params|setting|i/p|<br />|: |list}}
and such template were called with the following arguments,
| Beast of Bodmin = A large feline inhabiting Bodmin Moor
| Morgawr = A sea serpent
| Owlman = A giant owl-like creature
}}
the following result would be produced:
- Owlman: A giant owl-like creature
Beast of Bodmin: A large feline inhabiting Bodmin Moor
Morgawr: A sea serpent
We can also do more sophisticated things; for instance, by exploiting the possibility to set a header (h
) and a footer (f
), we can transform the previous code into a generator of definition lists,
{{#invoke:params|setting|h/p/i/f|<dl><dt>|</dt><dd>|</dd><dt>|</dd></dl>|list}}
thus yielding:
- Beast of Bodmin
- A large feline inhabiting Bodmin Moor
- Morgawr
- A sea serpent
- Owlman
- A giant owl-like creature
By placing the with_name_matching
modifier before the list
function we will be able to filter some parameters out – such as, for instance, all parameter names that do not end with an “n”:
{{#invoke:params|with_name_matching|n$|setting|h/p/i/f|<dl><dt>|</dt><dd>|</dd><dt>|</dd></dl>|list}}
Thus, the previous code will produce:
- Beast of Bodmin
- A large feline inhabiting Bodmin Moor
- Owlman
- A giant owl-like creature
This mechanism has the intrinsic advantage that it allows to concatenate infinite modifiers. And so, in order to get the accurate result that we want to obtain we could write:
{{#invoke:params|non-sequential|with_name_matching|^B|with_name_matching|n$|with_value_matching|feline|setting|h/p/i/f|<dl><dt>|</dt><dd>|</dd><dt>|</dd></dl>|list}}
The two modifiers sequential
and non-sequential
refer to a technical jargon used in wikitext: given a parameter list, the subgroup of sequential parameters is constituted by the largest group of consecutive numerical parameters starting from
Functions
සංස්කරණයHere follows the list of functions. You might want to see also § Modifiers.
self
සංස්කරණය
Num. of arguments | 0 |
---|---|
Not affected by | Any modifier |
See also | |
{{FULLPAGENAME}} |
- Brief
- Returns the name of the template that is calling this module
- Syntax
{{#invoke:params|self}}
This argumentless function guarantees that the name of the template invoking this module is shown, regardless if this is transcluded or not.
As a possible example, if a Wikipedia page named Page X
contained only a transclusion of a template named {{Foo bar}}
, and the latter contained the following wikitext,
{{#invoke:params|self}}
{{FULLPAGENAME}}
if we visited Template:Foo bar
we would see,
Template:Foo bar Template:Foo bar
whereas if we visited Page X
we would see:
Template:Foo bar Page X
Therefore by writing
{{#ifeq:{{#invoke:params|self}}|{{FULLPAGENAME}}
|Page is not being transcluded
|Page is being transcluded
}}
it is possible to understand whether a page is being transcluded or not.
If Page X
transcluded {{Foo bar 2}}
and the latter were a redirect to {{Foo bar}}
, we would still see
Template:Foo bar Page X
A typical use case of this function is that of providing stable links for editing transcluded templates. E.g.:
{{edit|{{#invoke:params|self}}|edit this template}}
Another possible use case is that of transcluding a subtemplate. E.g.:
{{{{#invoke:params|self}}/my subtemplate|foo|bar}}
count
සංස්කරණය
Num. of arguments | 0 |
---|---|
Often preceeded by | sequential |
Not affected by | all_sorted ,mapping…_by_calling ,mapping…by_invoking ,…blindly_by_calling ,…lindly_by_invoking |
See also | |
{{#invoke:ParameterCount}} |
- Brief
- Count the number of parameters wherewith a template was called
- Syntax
{{#invoke:params|count}}
This function does not take arguments.
The number that this function yields depends on the modifiers that precede it. For instance, in a template that is called with both named and unnamed arguments,
{{#invoke:params|count}}
and
{{#invoke:params|sequential|count}}
will return different results.
concat_and_call
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Not affected by | all_sorted |
See also | |
concat_and_invoke , concat_and_magic |
- Brief
- Prepend numerical arguments to the current parameters or impose non-numerical arguments, then propagate everything to a custom template
- Syntax
{{#invoke:params|concat_and_call|template name|[prepend 1]|[prepend 2]|[...]|[prepend n]|[named item 1=value 1]|[...]|[named item n=value n]|[...]}}
For example, if our {{Example template}}
had the following code,
{{#invoke:params|concat_and_call|foo bar|elbow|earth|room|7=classy|hello=not today}}
and were called with,
the following call to the {{Foo bar}}
template would be performed:
| elbow
| earth
| room
| 7 = classy
| 8 = one
| 9 = two
| 10 = three
| wind = spicy
| hello = not today
}}
If no other argument besides the template name are provided this function simply echoes the current parameters to another template.
Note: All arguments passed to this function except the template name are not trimmed of their leading and trailing spaces. The concat_and_call
function name itself, however, will be trimmed of its surrounding spaces.
concat_and_invoke
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Not affected by | all_sorted |
See also | |
concat_and_call , concat_and_magic |
- Brief
- Prepend numerical arguments to the current parameters, or impose non-numerical arguments; then propagate everything to a custom module
- Syntax
{{#invoke:params|concat_and_invoke|module name|function name|[prepend 1]|[prepend 2]|[...]|[prepend n]|[named item 1=value 1]|[...]|[named item n=value n]|[...]}}
Exactly like concat_and_call
, but invokes a module instead of calling a template.
Note: All arguments passed to this function except the module name and the function name are not trimmed of their leading and trailing spaces. The concat_and_invoke
function name itself, however, will be trimmed of its surrounding spaces.
concat_and_magic
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Not affected by | all_sorted |
See also | |
concat_and_call , concat_and_invoke |
- Brief
- Prepend numerical arguments to the current parameters, or impose non-numerical arguments; then propagate everything to a custom parser function
- Syntax
{{#invoke:params|concat_and_magic|parser function|[prepend 1]|[prepend 2]|[...]|[prepend n]|[named item 1=value 1]|[...]|[named item n=value n]|[...]}}
Exactly like concat_and_call
, but calls a parser function instead of a template.
Note: All arguments passed to this function except the magic word are not trimmed of their leading and trailing spaces. The concat_and_magic
function name itself, however, will be trimmed of its surrounding spaces.
value_of
සංස්කරණය
Num. of arguments | 1 |
---|---|
Relevant runtime variables | h , f , n |
Not affected by | all_sorted |
See also | |
list_values |
- Brief
- Get the value of a single parameter
- Syntax
{{#invoke:params|value_of|parameter name}}
Without modifiers this function is similar to writing {{{parameter name|}}}
. With modifiers, however, it allows to reach parameters that would be unreachable without knowing their number in advance. For instance, writing
{{#invoke:params|cutting|-2|0|value_of|1}}
will expand to the value of the second-last sequential parameter, independently of how many parameters the template was called with. If no matching parameter is found this function expands to nothing. A header (h
), a footer (f
), and a fallback text (n
) can be declared via the setting
modifier – the strings assigned to the key-value pair delimiter (p
), the iteration delimiter (i
) and the last iteration delimiter (l
) will be ignored.
list
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Relevant runtime variables | h , p , i , l , f , n |
See also | |
list_values |
- Brief
- List the template parameters (both their names and their values)
- Syntax
{{#invoke:params|list}}
This function does not take arguments.
If the setting
modifier was not placed earlier, this function will not add delimiters, but will return an indistinct blob of text in which keys and values are sticked to each other. A header (h
), a key-value pair delimiter (p
), an iteration delimiter (i
), a last iteration delimiter (l
), a footer (f
), and a fallback text (n
) can be declared via setting
.
For example, the following code
{{#invoke:params|setting|h/i/p/f/n|'''Parameters passed:''' |); | (|)|'''No parameters were passed'''|list}}
will generate an output similar to the following.
- Parameters passed: Owlman (A giant owl-like creature); Beast of Bodmin (A large feline inhabiting Bodmin Moor); Morgawr (A sea serpent)
list_values
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Often preceeded by | sequential |
Relevant runtime variables | h , i , l , f , n |
See also | |
list , value_of , {{#invoke:separated entries}} |
- Brief
- List the values of the incoming parameters
- Syntax
{{#invoke:params|list_values}}
This function does not take arguments.
The sequential
modifier often accompanies this function. If the setting
modifier was not placed earlier, this function will not add delimiters, but will return an indistinct blob of text in which values are sticked to each other. A header (h
), an iteration delimiter (i
), a last iteration delimiter (l
), a footer (f
), and a fallback text (n
) can be declared via setting
– the string assigned to the key-value pair delimiter (p
) will be ignored.
For example, the following code
{{#invoke:params|setting|h/i/p/f/n|'''Parameters passed:''' |); | (|)|'''No parameters were passed'''|list_values}}
will generate an output similar to the following.
- Values of parameters passed: A giant owl-like creature; A large feline inhabiting Bodmin Moor; A sea serpent.
call_for_each
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Relevant runtime variables | h , i , l , f , n |
See also | |
call_for_each_value , invoke_for_each , magic_for_each , {{#invoke:for loop}} , {{for loop}} |
- Brief
- For each parameter passed to the caller template, call a custom template with at least two parameters (key and value)
- Syntax
{{#invoke:params|call_for_each|template name|[append 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param n=value n]|[...] }}
All unnamed parameters following the template name will be placed after the key-value pair. Named parameters will be passed verbatim. A header (h
), an iteration delimiter (i
), a last iteration delimiter (l
), a footer (f
), and a fallback text (n
) can be declared via the setting
modifier – the string assigned to the key-value pair delimiter (p
) will be ignored.
Calling a template for each key-value pair with
{{#invoke:params|sequential|call_for_each|foobar}}
will be different from writing
{{#invoke:params|sequential|for_each|{{foobar|$#|$@}}}}
In the first example each key-value pair will be passed to the {{foobar}} template, while in the second example the $#
and $@
tokens will be expanded after the {{foobar}} template has been called. In most cases this will make no difference, however there are several situations where it will lead to nonsensical results.
Note: All arguments passed to this function except the template name are not trimmed of their leading and trailing spaces. The call_for_each
function name itself, however, will be trimmed of its surrounding spaces.
invoke_for_each
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Relevant runtime variables | h , i , l , f , n |
See also | |
invoke_for_each_value , call_for_each , magic_for_each |
- Brief
- For each parameter passed to the caller template, invoke a custom module function with at least two arguments (key and value)
- Syntax
{{#invoke:params|invoke_for_each|module name|module function|[append 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param n=value n]|[...]}}
Exactly like call_for_each
, but invokes a module instead of calling a template.
Invoking a module function for each key-value pair with
{{#invoke:params|sequential|invoke_for_each|foobar|main}}
will be different from writing
{{#invoke:params|sequential|for_each|{{#invoke:foobar|main|$#|$@}}}}
In the first example each key-value pair will be passed to the {{#invoke:foobar|main}} module function, while in the second example the $#
and $@
tokens will be expanded after the module function has been invoked. There might be cases in which this will make no difference, however there are several situations where it will lead to nonsensical results.
Note: All arguments passed to this function except the module name and the function name are not trimmed of their leading and trailing spaces. The invoke_for_each
function name itself, however, will be trimmed of its surrounding spaces.
magic_for_each
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Relevant runtime variables | h , i , l , f , n |
See also | |
magic_for_each_value , call_for_each , invoke_for_each |
- Brief
- For each parameter passed to the caller template, call a magic word with at least two arguments (key and value)
- Syntax
{{#invoke:params|magic_for_each|parser function|[append 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param n=value n]|[...]}}
Exactly like call_for_each
, but calls a parser function instead of a template.
Note: All arguments passed to this function except the magic word are not trimmed of their leading and trailing spaces. The magic_for_each
function name itself, however, will be trimmed of its surrounding spaces.
call_for_each_value
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Often preceeded by | sequential |
Relevant runtime variables | h , i , l , f , n |
See also | |
call_for_each , invoke_for_each_value , magic_for_each_value , {{#invoke:for loop}} , {{for loop}} |
- Brief
- For each parameter passed to the caller template, call a custom template with at least one parameter (i.e. the parameter's value)
- Syntax
{{#invoke:params|call_for_each_value|template name|[append 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param n=value n]|[...]}}
The sequential
modifier often accompanies this function. All unnamed parameters following the template name will be appended after the value parameter. Named parameters will be passed verbatim. A header (h
), an iteration delimiter (i
), a last iteration delimiter (l
), a footer (f
), and a fallback text (n
) can be declared via the setting
modifier – the string assigned to the key-value pair delimiter (p
) will be ignored.
For example, calling {{tl}} with each parameter can be done by writing
{{#invoke:params|sequential|setting|i|, |call_for_each_value|tl}}
This will be different from writing
{{#invoke:params|sequential|setting|i|, |for_each|{{tl|$@}}}}
In the first example each value will be passed to the {{tl}} template, while in the second example the $@
token will be expanded after the {{tl}} template has been called. Here this will make no difference, however there are several situations where it will lead to nonsensical results.
Note: All arguments passed to this function except the template name are not trimmed of their leading and trailing spaces. The call_for_each_value
function name itself, however, will be trimmed of its surrounding spaces.
invoke_for_each_value
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Often preceeded by | sequential |
Relevant runtime variables | h , i , l , f , n |
See also | |
call_for_each_value , invoke_for_each , magic_for_each_value |
- Brief
- For each parameter passed to the caller template, invoke a custom module function with at least one argument (i.e. the parameter's value)
- Syntax
{{#invoke:params|invoke_for_each_value|module name|module function|[append 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param n=value n]|[...]}}
Exactly like call_for_each_value
, but invokes a module instead of calling a template.
Invoking a module function for each value with
{{#invoke:params|sequential|invoke_for_each_value|foobar|main}}
will be different from writing
{{#invoke:params|sequential|for_each|{{#invoke:foobar|main|$@}}}}
In the first example each value will be passed to the {{#invoke:foobar|main}} module function, while in the second example the $@
token will be expanded after the module function has been invoked. There might be cases in which this will make no difference, however there are several situations where it will lead to nonsensical results.
Note: All arguments passed to this function except the module name and the function name are not trimmed of their leading and trailing spaces. The invoke_for_each_value
function name itself, however, will be trimmed of its surrounding spaces.
magic_for_each_value
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Sortable | Yes |
Often preceeded by | sequential |
Relevant runtime variables | h , i , l , f , n |
See also | |
call_for_each_value , invoke_for_each_value , magic_for_each |
- Brief
- For each parameter passed to the caller template, call a magic word with at least one argument (i.e. the parameter's value)
- Syntax
{{#invoke:params|magic_for_each_value|parser function|[append 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param n=value n]|[...]}}
Exactly like call_for_each_value
, but calls a parser function instead of a template.
For example, if a template had the following code,
{{#invoke:params|sequential|setting|ih|&preloadparams%5b%5d{{=}}|magic_for_each_value|urlencode|QUERY}}
and were transcluded as {{example template|hello world|àèìòù|foo bar}}
, the {{urlencode:...|QUERY}}
parser function would be called for each incoming parameter as first argument and with QUERY
as second argument, and finally the returned text would be prefixed with &preloadparams%5b%5d=
. This would generate,
&preloadparams%5b%5d=hello+world&preloadparams%5b%5d=%C3%A0%C3%A8%C3%AC%C3%B2%C3%B9&preloadparams%5b%5d=foo+bar
which can be used to allow the creation of pages with preloaded text and parameters.
Note: All arguments passed to this function except the magic word are not trimmed of their leading and trailing spaces. The magic_for_each_value
function name itself, however, will be trimmed of its surrounding spaces.
for_each
සංස්කරණය
Num. of arguments | 1 |
---|---|
Sortable | Yes |
Relevant runtime variables | h , i , l , f , n |
See also | |
list , list_values , {{#invoke:for nowiki}} , {{for nowiki}} |
- Brief
- For each parameter passed to the caller template, expand all occurrences of
$#
and$@
within a given text as key and value respectively - Syntax
{{#invoke:params|for_each|wikitext}}
Example:
{{#invoke:params|for_each|Arg name: $#, Arg value: $@}}
The text returned by this function is not expanded further (currently this module does not offer an expand_for_each
function). If you need wikitext expansion, use concat_and_call
to propagate the incoming parameters altogether to the {{for nowiki}} template. Example:
{{#invoke:params|sequential|concat_and_call|for nowiki|[separator]|<nowiki>{{{i}}} is {{urlencode:{{{1}}}|QUERY}}</nowiki>}}
Note: The argument passed to this function is not trimmed of its leading and trailing spaces. The for_each
function name itself, however, will be trimmed of its surrounding spaces.
Modifiers (piping functions)
සංස්කරණයThe following are modifiers, i.e. functions that expect to be piped instead of returning to the caller. Each of them can be followed by either another modifier or a non-piping function. The actions that modifiers do are done sequentially, in the same order chosen during the invocation of this module. Some modifiers, however, after signaling their presence to the modifiers that might follow, add their action to the queue of actions that will be done last (e.g. sequential
, non-sequential
, all_sorted
).
sequential
සංස්කරණය
Num. of arguments | 0 |
---|---|
Repeatable | No |
Conflicts with | non-sequential , all_sorted |
See also | |
non-sequential , all_sorted , squeezing |
- Brief
- Reduce the parameter list to the subgroup of consecutive parameters that follow
|1= - Syntax
{{#invoke:params|sequential|pipe function name}}
Example:
{{#invoke:params|sequential|count}}
This modifier does not take arguments besides the name of the function that will follow.
Using sequential
together with non-sequential
will generate an error.
Note: Like non-sequential
, the sequential
modifier permanently marks a query. For instance, writing {{#invoke:params|sequential|with_name_not_matching|1|...}}
will first mark the query as “sequential”, then will discard the first element from the sequence (leaving all the others intact). And so, no matter how many other parameters will be present, nothing will be shown.
non-sequential
සංස්කරණය
Num. of arguments | 0 |
---|---|
Repeatable | No |
Conflicts with | sequential |
See also | |
sequential , all_sorted |
- Brief
- Reduce the parameter list by discarding the subgroup of consecutive parameters that follow
|1= - Syntax
{{#invoke:params|non-sequential|pipe function name}}
Example:
{{#invoke:params|non-sequential|setting|ih/p|{{!}}|{{=}}|list}}
This modifier does not take arguments besides the name of the function that will follow.
Using non-sequential
together with sequential
will generate an error.
Note: Like sequential
, the non-sequential
modifier permanently marks a query, and no matter what transformations will follow (see squeezing
) the parameters' “sequence” will not be shown.
all_sorted
සංස්කරණය
Num. of arguments | 0 |
---|---|
Repeatable | No |
Conflicts with | sequential |
Has no effects on | count , value_of , concat_and_call , concat_and_invoke , concat_and_magic |
See also | |
sequential |
- Brief
- When the time will come, all parameters will be dispatched sorted: first the numerical ones, then the rest in alphabetical order
- Syntax
{{#invoke:params|all_sorted|pipe function name}}
Example:
{{#invoke:params|all_sorted|setting|ih/p|{{!}}|{{=}}|list}}
This modifier does not take arguments besides the name of the function that will follow.
Normally only sequential parameters are dispatched sorted, whereas non-sequential ones are dispatched randomly. The all_sorted
modifier ensures that nothing is left out of (alphabetical) order. Attention must be paid to the fact that parameters whose name is a negative number will appear first. To avoid this the squeezing
modifier can be used.[1]
The all_sorted
modifier only affects the way parameters are shown, but has no effects on functions that do not iterate or cannot impose an order, such as:
Note: The all_sorted
modifier cannot be used with functions that propagate several parameters together in a single call, like concat_and_call
, concat_and_invoke
, and concat_and_magic
, because during a call the order of arguments is always lost. For the same reason, it is not possible to guess the order of named parameters a template was invoked with.
setting
සංස්කරණය
Num. of arguments | 2–7 (variable) | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Repeatable | Yes | ||||||||||||
Memory slots | |||||||||||||
|
- Brief
- Define glue strings
- Syntax
{{#invoke:params|setting|directives|...|pipe function name}}
This modifier allows to set some internal variables that will be used by functions. It takes a variable number of arguments, relying on the first argument to understand how many other arguments to read. A few examples will introduce it better than words:
{{#invoke:params|setting|i|{{!}}|list_values}}
- ↳ Set the value of iteration delimiter to
|
, then list all values
- ↳ Set the value of iteration delimiter to
{{#invoke:params|setting|ih|{{!}}|list_values}}
- ↳ Set the value of both header text and iteration delimiter to
|
, then list all values
- ↳ Set the value of both header text and iteration delimiter to
{{#invoke:params|setting|ih/p|{{!}}|{{=}}|list}}
- ↳ Set the value of both header text and iteration delimiter to
|
, set key-value pair delimiter to=
, then list all parameters
- ↳ Set the value of both header text and iteration delimiter to
{{#invoke:params|setting|ih/p/n|{{!}}|{{=}}|No parameters were passed|list}}
- ↳ Set the value of both header text and iteration delimiter to
|
, set key-value pair delimiter to=
, set fallback text toNo parameters were passed
, then list all parameters
- ↳ Set the value of both header text and iteration delimiter to
The first argument is a slash-separated list of lists of slots to assign; one slot is referred by exactly one character and each list of slots maps exactly one argument. A slot indicates which internal variable to set. If more than one slot is aggregated within the same slash-separated list the same text will be assigned to more than one variable.
The slots available are the following:
Slots | Variable | Description |
---|---|---|
p
|
Key-value pair delimiter | The string of text that will be placed between each parameter name and its value; it is never inserted by functions that only iterate between values, or by functions that pass the key-value pairs to external calls. |
i
|
Iteration delimiter | The string of text that will be placed between each iteration; it is never inserted unless there are two or more parameters to show when l is not given, or three or more parameters when l is given.
|
l
|
Last iteration delimiter | The string of text that will be placed between the second last and the last iteration; it is never inserted unless there are two or more parameters to show; if omitted defaults to i .
|
h
|
Header text | The string of text that will be placed before the iteration begins; it is never inserted if there are no parameters to show. |
f
|
Footer text | The string of text that will be placed after the iteration is over; it is never inserted if there are no parameters to show. |
n
|
Fallback text | The string of text that will be placed if there are no parameters to show. |
All space characters in the directives arguments are discarded. Therefore writing {{#invoke:params|setting|ih/p|...}}
is equivalent to writing
{{#invoke:params|setting| i
h / p |...}}
In theory, instead of assigning different slots at once (i.e. {{...|setting|ih/p|{{!}}|{{=}}|...}}
), it is possible to write separate invocations of setting
for each variable, as in {{...|setting|ih|{{!}}|setting|p|{{=}}...}}
. This method however will be slightly less efficient.
Sometimes it might be necessary to make the values assigned depend on conditional expressions. For instance, the following imaginary {{Foobar see also}}
template uses the #ifexpr
parser function to properly show the “and” conjunction and possibly an Oxford comma when more than two page names are provided:
{{Hatnote|{{{altphrase|Foobar see also}}}: {{#if:{{{1|}}}
|{{#invoke:params|sequential|squeezing|setting|i/l|, |{{#ifexpr:{{#invoke:params|sequential|squeezing|count}} > 2|,}} and |trimming_values|for_each|[[$@]]}}
|{{Error|{{tl|Foobar see also}} requires at least one page name}}
}}}}
You can find this example at {{./doc/examples/Oxford comma}}. E.g., {{module:params/doc/examples/Oxford comma|Latin|English|German|Italian}}
will generate
Module:Params/doc/examples/Oxford comma
Note: The setting
modifier will be trimmed of its surrounding spaces. The directives argument will be stripped of all space characters, including internal spaces. All the other arguments passed to this modifier will be parsed verbatim (i.e. leading and trailing spaces will not be removed).
squeezing
සංස්කරණය
Num. of arguments | 0 |
---|---|
Repeatable | Yes |
See also | |
sequential |
- Brief
- Rearrange all parameters that have numerical names to form a compact sequence starting from 1, keeping the same order
- Syntax
{{#invoke:params|squeezing|pipe function name}}
Example:
{{#invoke:params|squeezing|sequential|setting|i/p|<br />|: |list}}
This modifier does not take arguments besides the name of the function that will follow.
The following three concatenations will lead to the same result of discarding all parameters with numerical names:
{{...|non-sequential|squeezing|...}}
{{...|squeezing|non-sequential|...}}
{{...|with_name_not_matching|^%-?%d+$|...}}
cutting
සංස්කරණය
Num. of arguments | 2 |
---|---|
Repeatable | Yes |
See also | |
sequential , squeezing |
- Brief
- Remove zero or more parameters from the beginning and the end of the parameter list
- Syntax
{{#invoke:params|cutting|left trim|right trim|pipe function name}}
The first argument indicates how many sequential parameters must be removed from the beginning of the parameter list, the second argument indicates how many sequential parameters must be removed from the end of the parameter list. If any of the two arguments contains a negative number its absolute value indicates what must be left on the other side – i.e. {{#invoke:params|cutting|-3|0|list}}
indicates that the last three arguments must not be discarded.
Example:
{{#invoke:params|cutting|0|2|sequential|call_for_each_value|example template}}
If the absolute value of the sum of the two arguments (left and right cut) is greater than the number of sequential parameters available, the behavior will be the same as if the sum had been equal to the number of sequential parameters available, both when this is a positive value and when it is a negative value (with opposite results). After the desired sequential parameters have been discarded, all numerical parameters will be shifted accordingly.
In some cases it might be necessary to concatenate more than one invocation of the cutting
modifier. For instance, the following code prints the last unnamed parameter passed, but only if at least two parameters were passed:
{{#invoke:params|sequential|cutting|1|0|cutting|-1|0|list_values}}
Suggestion: Although {{#invoke:params|cutting|-1|1|...}}
de facto gets rid of all sequential parameters, it is clearer and more idiomatic to write {{#invoke:params|non-sequential|...}}
to obtain the same effect. Writing instead {{#invoke:params|sequential|cutting|-1|1|...}}
will leave zero arguments to show.
with_name_matching
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
with_name_not_matching , with_value_matching , with_value_not_matching |
- Brief
- Discard all parameters whose name does not match any of the given patterns
- Syntax
{{#invoke:params|with_name_matching|pattern 1|[plain flag 1]|[or]|[pattern 2]|[plain flag 2]|[or]|[...]|[pattern N]|[plain flag N]|pipe function name}}
Internally this modifier uses Lua's string.find()
function to find whether parameter names match against given patterns; therefore, unless a target string is set to plain
, please use the same syntax of Lua patterns. The plain flag can be either plain
or omitted. When omitted it is assumed that the target string is a Lua pattern.
To express a logical OR the or
keyword is available. To express a logical AND instead, concatenate more invocations of with_name_matching
.
For the sake of argument we will imagine that we are invoking with_name_matching
from within the {{Infobox artery}} template, and this is being called with the following parameters:
| Name = Pulmonary artery
| Latin = truncus pulmonalis, arteria pulmonalis
| Image = {{Heart diagram 250px}}
| Caption = Anterior (frontal) view of the opened heart. (Pulmonary artery upper right.)
| Image2 = Alveoli diagram.png
| Caption2 = Diagram of the alveoli with both cross-section and external view.
| BranchFrom = [[right ventricle]]
| BranchTo =
| Vein = [[pulmonary vein]]
| Precursor = truncus arteriosus
| Supplies =
}}
Test cases:
- List only the parameters whose names match against the
^Image
pattern:- ↳
{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_matching|^Image|list}}
- ↳ |Image={{Heart diagram 250px}}|Image2=Alveoli diagram.png
- ↳
- List the parameters whose names match against both patterns
^Image
and%d+$
:- ↳
{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_matching|^Image|with_name_matching|%d+$|list}}
- ↳ |Image2=Alveoli diagram.png
- ↳
- List the parameters whose names match against either the
^Name
or the^Latin$
pattern:- ↳
{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_matching|^Name$|or|^Latin$|list}}
- ↳ |Latin=truncus pulmonalis, arteria pulmonalis|Name=Pulmonary artery
- ↳
- List the parameters whose names match against either the
ma
plain string or theme$
pattern:- ↳
{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_matching|ma|plain|or|me$|list}}
- ↳ |Image={{Heart diagram 250px}}|Name=Pulmonary artery|Image2=Alveoli diagram.png
- ↳
Note: The pattern arguments passed to this function are not trimmed of their leading and trailing spaces. The or
and plain
keywords, and the with_name_matching
function name itself, however, will be trimmed of their surrounding spaces.
with_name_not_matching
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
with_name_matching , with_value_matching , with_value_not_matching |
- Brief
- Discard all parameters whose name matches all the given patterns
- Syntax
{{#invoke:params|with_name_not_matching|pattern 1|[plain flag 1]|[and]|[pattern 2]|[plain flag 2]|[and]|[...]|[pattern N]|[plain flag N]|pipe function name}}
Internally this modifier uses Lua's string.find()
function to find whether parameter names match against given patterns; therefore, unless a target string is set to plain
, please use the same syntax of Lua patterns. The plain flag can be either plain
or omitted. When omitted it is assumed that the target string is a Lua pattern.
To express a logical OR the or
keyword is available. To express a logical AND instead, concatenate more invocations of with_name_not_matching
.
For the sake of argument we will imagine that we are invoking with_name_not_matching
from within the {{Infobox artery}} template, and this is being transcluded using the same parameters that we had imagined in the previous example at with_name_matching
:
- List only the parameters whose names do not match against the
a
pattern:{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_not_matching|a|list}}
- ↳ |Precursor=truncus arteriosus|Supplies=|Vein=pulmonary vein
- List the parameters whose names do not match against the
a
plain string and do not match against thel
plain string either:{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_not_matching|a|plain|with_name_not_matching|l|plain|list}}
- ↳ |Precursor=truncus arteriosus|Vein=pulmonary vein
- List the parameters whose names do not match against either the
a
plain string or then
plain string:{{#invoke:params|setting|ih/p|{{!}}|{{=}}|with_name_not_matching|a|plain|or|n|plain|list}}
- ↳ |Precursor=truncus arteriosus|Supplies=|Image={{Heart diagram 250px}}|Name=Pulmonary artery|Image2=Alveoli diagram.png|Vein=pulmonary vein
It is possible to use this function to check for unknown parameters:
{{#ifexpr:{{#invoke:params|with_name_not_matching|^hello$|with_name_not_matching|^wind$|count}} > 0
|{{#invoke:Error|error|Error: The only parameters accepted are {{para|hello}} and {{para|wind}}.}}
|Everything is good: do something
}}
For simple cases like this, however, specialized modules are available; you might want to have a look at:
- {{#invoke:Check for unknown parameters|check}}
- {{#invoke:Check for deprecated parameters|check}}
- {{#invoke:Check for clobbered parameters|check}}
- {{#invoke:Parameter validation|validateparams}}
- {{#invoke:TemplatePar|valid}}
Note: The pattern arguments passed to this function are not trimmed of their leading and trailing spaces. The or
and plain
keywords, and the with_name_not_matching
function name itself, however, will be trimmed of their surrounding spaces.
with_value_matching
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
with_name_matching , with_name_not_matching , with_value_not_matching |
- Brief
- Discard all parameters whose value does not match any of the given patterns
- Syntax
{{#invoke:params|with_value_matching|pattern 1|[plain flag 1]|[or]|[pattern 2]|[plain flag 2]|[or]|[...]|[pattern N]|[plain flag N]|pipe function name}}
Exactly like with_name_matching
, but applied to parameter values instead of names.
Internally this modifier uses Lua's string.find()
function to find whether parameter names match against given patterns; therefore, unless a target string is set to plain
, please use the same syntax of Lua patterns. The plain flag can be either plain
or omitted. When omitted it is assumed that the target string is a Lua pattern.
Example:
{{#invoke:params|with_value_matching|banana|count}}
Note: The pattern arguments passed to this function are not trimmed of their leading and trailing spaces. The or
and plain
keywords, and the with_value_matching
function name itself, however, will be trimmed of their surrounding spaces.
with_value_not_matching
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
with_name_matching , with_name_not_matching , with_value_matching |
- Brief
- Discard all parameters whose value matches all the given patterns
- Syntax
{{#invoke:params|with_value_not_matching|pattern 1|[plain flag 1]|[and]|[pattern 2]|[plain flag 2]|[and]|[...]|[pattern N]|[plain flag N]|pipe function name}}
Exactly like with_name_not_matching
, but applied to parameter values instead of names.
Internally this modifier uses Lua's string.find()
function to find whether parameter names match against given patterns; therefore, unless a target string is set to plain
, please use the same syntax of Lua patterns. The plain flag can be either plain
or omitted. When omitted it is assumed that the target string is a Lua pattern.
For instance, before calling list
, the following code will get rid of all blank parameters (i.e. parameters whose values contain only zero or more spaces):
{{#invoke:params|with_value_not_matching|^%s*$|setting|hi/p|{{!}}|{{=}}|list}}
Note: The pattern arguments passed to this function are not trimmed of their leading and trailing spaces. The or
and plain
keywords, and the with_value_not_matching
function name itself, however, will be trimmed of their surrounding spaces.
trimming_values
සංස්කරණය
Num. of arguments | 0 |
---|---|
Repeatable | No |
- Brief
- Remove leading and trailing spaces from values
- Syntax
{{#invoke:params|trimming_values|pipe function name}}
This modifier does not take arguments besides the name of the function that will follow.
Most modifiers are order-dependent, therefore placing trimming_values
in different positions can generate different results. For instance, imagining our {{Example template}}
being called with the following spaced arguments: {{Example template| wanna | be | my | friend | ? }}
. If {{Example template}}
contained the following code,
{{#invoke:params|with_value_matching|%s+$|trimming_values|setting|i/p|{{!}}|{{=}}|list}}
the following text would be printed: 1=wanna|2=be|3=my|4=friend|5=?
. But if instead it contained the following code,
{{#invoke:params|trimming_values|with_value_matching|%s+$|setting|i/p|{{!}}|{{=}}|list}}
no arguments would be shown.
Order affects also performance, and how many values will be trimmed of their leading and trailing spaces will depend on where trimming_values
is placed. For instance, if a template were invoked with 50 parameters and its code contained {{#invoke:params|trimming_values|cutting|-1|0|list}}
, first all its values would be trimmed of leading and trailing blank spaces and then its first 49 parameters would be discarded. On the other hand, writing {{#invoke:params|cutting|-1|0|trimming_values|list}}
would first discard 49 parameters and then trim the only value left, resulting in a more efficient code. As a general rule, placing trimming_values
as the last modifier is usually the best choice.
Placing trimming_values
together with non-sequential
will result in an empty call with no effects, because non-sequential parameters are stripped of their leading and trailing spaces by default.
Using trimming_values
makes this module behave like many Wikipedia modules behave. For example, if we wanted to emulate {{#invoke:Separated entries|main}}, writing
{{#invoke:params|sequential|squeezing|trimming_values|setting|i|XXXX|list_values}}
will be equivalent to writing,
{{#invoke:separated entries|main|separator=XXXX}}
whereas writing
{{#invoke:params|sequential|squeezing|trimming_values|setting|i/l|XXXX|YYYY|list_values}}
will be equivalent to writing
{{#invoke:separated entries|main|separator=XXXX|conjunction=YYYY}}
The {{./doc/trim and call}} example template shows how to call any arbitrary template trimming all parameters beforehand.
mapping_values_by_calling
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
mapping_values_by_invoking , mapping_values_blindly_by_calling , mapping_values_blindly_by_invoking |
- Brief
- Map all parameter values, replacing their content with the expansion of a given template repeatedly called with at least two arguments (the parameter's name and value)
- Syntax
{{#invoke:params|mapping_values_by_calling|template name|[number of additional arguments]|[argument 1]|[argument 2]|[...]|[argument N]|pipe function name}}
This modifier (temporarily) changes the contents of the parameters the current template is being called with, replacing each of them with the text returned by another template. The latter will be repeatedly called with at least two parameters: key and value. If the template name is followed by a number, this will be parsed as the amount of additional parameters to pass. For instance, before listing all parameters,
{{#invoke:params|mapping_values_by_calling|foobar|setting|i/p|{{!}}|{{=}}|list}}
will replace each value with the expansion of {{foobar|NAME|VALUE}}
(where NAME
and VALUE
indicate each different name and value).
On the other hand,
{{#invoke:params|mapping_values_by_calling|foobar|2|hello|world|setting|i/p|{{!}}|{{=}}|list}}
will do the same, but using the expansion of {{foobar|NAME|VALUE|hello|world}}
.
There are no mechanisms for passing non-sequential or non-numeric additional parameters to the mapping template. A similar function, mapping_values_blindly_by_calling
, omits the first parameter (i.e. the parameter's name).
Note: All arguments passed to this modifier except the template name and the number of additional arguments are not trimmed of their leading and trailing spaces. The mapping_values_by_calling
modifier name itself, however, will be trimmed of its surrounding spaces.
mapping_values_by_invoking
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
mapping_values_by_calling , mapping_values_blindly_by_calling , mapping_values_blindly_by_invoking |
- Brief
- Map all parameter values, replacing their content with the text returned by a given module function repeatedly invoked with at least two arguments (the parameter's name and value)
- Syntax
{{#invoke:params|mapping_values_by_invoking|template name|[number of additional arguments]|[argument 1]|[argument 2]|[...]|[argument N]|pipe function name}}
This modifier (temporarily) changes the contents of the parameters the current template is being called with, replacing each of them with text returned by a custom module function. The latter will be repeatedly invoked with at least two arguments: key and value. If the function name is followed by a number, this will be parsed as the amount of additional arguments to pass. For instance, before listing all parameters,
{{#invoke:params|mapping_values_by_invoking|foobar|main|setting|i/p|{{!}}|{{=}}|list}}
will replace each value with the expansion of {{#invoke:foobar|main|NAME|VALUE}}
(where NAME
and VALUE
indicate each different name and value).
On the other hand,
{{#invoke:params|mapping_values_by_invoking|foobar|main|2|hello|world|setting|i/p|{{!}}|{{=}}|list}}
will do the same, but using the expansion of {{#invoke:foobar|main|NAME|VALUE|hello|world}}
.
There are no mechanisms for passing non-sequential or non-numeric additional arguments to the mapping module. A similar function, mapping_values_blindly_by_invoking
, omits the first argument (i.e. the parameter's name).
Note: All arguments passed to this modifier except the module name, the function name and the number of additional arguments are not trimmed of their leading and trailing spaces. The mapping_values_by_invoking
modifier name itself, however, will be trimmed of its surrounding spaces.
mapping_values_blindly_by_calling
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
mapping_values_by_calling , mapping_values_by_invoking , mapping_values_blindly_by_invoking |
- Brief
- Map all parameter values, replacing their content with the expansion of a given template repeatedly called with at least one argument (the parameter's value)
- Syntax
{{#invoke:params|mapping_values_blindly_by_calling|template name|[number of additional arguments]|[argument 1]|[argument 2]|[...]|[argument N]|pipe function name}}
This modifier (temporarily) changes the contents of the parameters the current template is being called with, replacing each of them with the text returned by another template. The latter will be repeatedly called with at least one parameter: the parameter's value. If the template name is followed by a number, this will be parsed as the amount of additional parameters to pass. For instance, before listing all parameters,
{{#invoke:params|mapping_values_blindly_by_calling|foobar|setting|i/p|{{!}}|{{=}}|list}}
will replace each value with the expansion of {{foobar|VALUE}}
(where VALUE
indicates each different value).
On the other hand,
{{#invoke:params|mapping_values_blindly_by_calling|foobar|2|hello|world|setting|i/p|{{!}}|{{=}}|list}}
will do the same, but using the expansion of {{foobar|VALUE|hello|world}}
.
There are no mechanisms for passing non-sequential or non-numeric additional parameters to the mapping template. A similar function, mapping_values_by_calling
, passes the parameter's name as well, as first argument.
Note: All arguments passed to this modifier except the template name and the number of additional arguments are not trimmed of their leading and trailing spaces. The mapping_values_blindly_by_calling
modifier name itself, however, will be trimmed of its surrounding spaces.
mapping_values_blindly_by_invoking
සංස්කරණය
Num. of arguments | Ad libitum |
---|---|
Repeatable | Yes |
See also | |
mapping_values_by_calling , mapping_values_by_invoking , mapping_values_blindly_by_calling |
- Brief
- Map all parameter values, replacing their content with the text returned by a given module function repeatedly invoked with at least one argument (the parameter's value)
- Syntax
{{#invoke:params|mapping_values_blindly_by_invoking|template name|[number of additional arguments]|[argument 1]|[argument 2]|[...]|[argument N]|pipe function name}}
This modifier (temporarily) changes the contents of the parameters the current template is being called with, replacing each of them with text returned by a custom module function. The latter will be repeatedly invoked with at least one argument: the parameter's value. If the function name is followed by a number, this will be parsed as the amount of additional arguments to pass. For instance, before listing all parameters,
{{#invoke:params|mapping_values_blindly_by_invoking|foobar|main|setting|i/p|{{!}}|{{=}}|list}}
will replace each value with the expansion of {{#invoke:foobar|main|VALUE}}
(where VALUE
indicates each different value).
On the other hand,
{{#invoke:params|mapping_values_blindly_by_invoking|foobar|main|2|hello|world|setting|i/p|{{!}}|{{=}}|list}}
will do the same, but using the expansion of {{#invoke:foobar|main|VALUE|hello|world}}
.
There are no mechanisms for passing non-sequential or non-numeric additional arguments to the mapping module. A similar function, mapping_values_by_invoking
, passes the parameter's name as well, as first argument.
Note: All arguments passed to this modifier except the module name, the function name and the number of additional arguments are not trimmed of their leading and trailing spaces. The mapping_values_blindly_by_invoking
modifier name itself, however, will be trimmed of its surrounding spaces.
Subpages
සංස්කරණය- en:Module:Params/ChangeLog – Record of the most important changes in the module's code
- en:Module:Params/testcases – Testing the module's capabilities
Notes
සංස්කරණය- ^ To be precise, the order will not be strictly alphabetical, because this would imply that a template called with the following parameters
{{foobar|-4=you|9=wanna|.=me?|11=marry|-8=do}}
would see them reordered as follows:{{foobar|-8=do|-4=you|.=me?|9=wanna|11=marry}}
(with the dot in the middle between negative and positive numbers). To avoid this, numbers are always displayd first (i.e.{{foobar|-8=do|-4=you|9=wanna|11=marry|.=me?}}
).
See also
සංස්කරණය- {{#invoke:TemplatePar}}
- {{#invoke:ParameterCount}}
- {{#invoke:Separated entries|main}}
- {{#invoke:Enumerate|main}}
- {{#invoke:Check for unknown parameters|check}}
- {{#invoke:Check for deprecated parameters|check}}
- {{#invoke:Check for clobbered parameters|check}}
- {{#invoke:Parameter validation}}
- {{#invoke:Expand wikitext|main}}
- {{#invoke:For loop|main}} and {{For loop}}
- {{#invoke:For nowiki|main}} and {{For nowiki}}
- Project:TemplateData
--- ---
--- LOCAL ENVIRONMENT ---
--- ________________________________ ---
--- ---
--[[ Abstract utilities ]]--
----------------------------
-- Helper function for `string.gsub()` (for managing zero-padded numbers)
local function zero_padded (str)
return ('%03d%s'):format(#str, str)
end
-- Helper function for `table.sort()` (for natural sorting)
local function natural_sort (var1, var2)
return tostring(var1):gsub('%d+', zero_padded) <
tostring(var2):gsub('%d+', zero_padded)
end
-- Return a copy or a reference to a table
local function copy_or_ref_table (src, refonly)
if refonly then return src end
newtab = {}
for key, val in pairs(src) do newtab[key] = val end
return newtab
end
-- Remove numerical elements from a table, shifting everything to the left
local function remove_numerical_keys (tbl, idx, len)
local cache = {}
local tmp = idx + len - 1
for key, val in pairs(tbl) do
if type(key) == 'number' and key >= idx then
if key > tmp then cache[key - len] = val end
tbl[key] = nil
end
end
for key, val in pairs(cache) do tbl[key] = val end
end
-- Make a reduced copy of a table (shifting in both directions if necessary)
local function copy_table_reduced (tbl, idx, len)
local ret = {}
local tmp = idx + len - 1
if idx > 0 then
for key, val in pairs(tbl) do
if type(key) ~= 'number' or key < idx then
ret[key] = val
elseif key > tmp then ret[key - len] = val end
end
elseif tmp > 0 then
local nshift = 1 - idx
for key, val in pairs(tbl) do
if type(key) ~= 'number' then ret[key] = val
elseif key > tmp then ret[key - tmp] = val
elseif key < idx then ret[key + nshift] = val end
end
else
for key, val in pairs(tbl) do
if type(key) ~= 'number' or key > tmp then
ret[key] = val
elseif key < idx then ret[key + len] = val end
end
end
return ret
end
-- Make an expanded copy of a table (shifting in both directions if necessary)
--[[
local function copy_table_expanded (tbl, idx, len)
local ret = {}
local tmp = idx + len - 1
if idx > 0 then
for key, val in pairs(tbl) do
if type(key) ~= 'number' or key < idx then
ret[key] = val
else ret[key + len] = val end
end
elseif tmp > 0 then
local nshift = idx - 1
for key, val in pairs(tbl) do
if type(key) ~= 'number' then ret[key] = val
elseif key > 0 then ret[key + tmp] = val
elseif key < 1 then ret[key + nshift] = val end
end
else
for key, val in pairs(tbl) do
if type(key) ~= 'number' or key > tmp then
ret[key] = val
else ret[key - len] = val end
end
end
return ret
end
]]--
-- Move a key from a table to another, but only if under a different name and
-- always parsing numerical strings as numbers
local function steal_if_renamed (val, src, skey, dest, dkey)
local realkey = tonumber(dkey) or dkey:match'^%s*(.-)%s*$'
if skey ~= realkey then
dest[realkey] = val
src[skey] = nil
end
end
--[[ Public strings ]]--
------------------------
-- Special match keywords (functions and modifiers MUST avoid these names)
local mkeywords = {
['or'] = 0,
pattern = 1,
plain = 2,
strict = 3
}
-- Sort functions (functions and modifiers MUST avoid these names)
local sortfunctions = {
--alphabetically = false, -- Simply uncommenting enables the option
naturally = natural_sort
}
-- Callback styles for the `mapping_*` and `renaming_*` class of modifiers
-- (functions and modifiers MUST avoid these names)
--[[
Meanings of the columns:
col[1] = Loop type (0-3)
col[2] = Number of module arguments that the style requires (1-3)
col[3] = Minimum number of sequential parameters passed to the callback
col[4] = Name of the callback parameter where to place each parameter name
col[5] = Name of the callback parameter where to place each parameter value
col[6] = Argument in the modifier's invocation that will override `col[4]`
col[7] = Argument in the modifier's invocation that will override `col[5]`
A value of `-1` indicates that no meaningful value is stored (i.e. `nil`)
]]--
local mapping_styles = {
names_and_values = { 3, 2, 2, 1, 2, -1, -1 },
values_and_names = { 3, 2, 2, 2, 1, -1, -1 },
values_only = { 1, 2, 1, -1, 1, -1, -1 },
names_only = { 2, 2, 1, 1, -1, -1, -1 },
names_and_values_as = { 3, 4, 0, -1, -1, 2, 3 },
names_only_as = { 2, 3, 0, -1, -1, 2, -1 },
values_only_as = { 1, 3, 0, -1, -1, -1, 2 },
blindly = { 0, 2, 0, -1, -1, -1, -1 }
}
-- Memory slots (functions and modifiers MUST avoid these names)
local memoryslots = {
i = 'itersep',
l = 'lastsep',
p = 'pairsep',
h = 'header',
f = 'footer',
n = 'ifngiven'
}
-- Functions and modifiers MUST avoid these names too: `let`
--[[ Module's private environment ]]--
--------------------------------------
-- Functions listed here declare that they don't need the `frame.args`
-- metatable to be copied into a regular table; if they are modifiers they also
-- guarantee that they will make available their own (modified) copy
local refpipe = {
count = true,
value_of = true,
list = true,
list_values = true,
for_each = true,
call_for_each_group = true
}
-- Functions listed here declare that they don't need the
-- `frame:getParent().args` metatable to be copied into a regular table; if
-- they are modifiers they also guarantee that they will make available their
-- own (modified) copy
local refparams = {
--inserting = true,
grouping_by_calling = true,
count = true,
concat_and_call = true,
concat_and_invoke = true,
concat_and_magic = true,
value_of = true,
call_for_each_group = true
}
-- Maximum number of numerical parameters that can be filled, if missing (we
-- chose an arbitrary number for this constant; you can discuss about its
-- optimal value at Module talk:Params)
local maxfill = 1024
-- The private table of functions
local library = {}
-- Functions that can only be invoked in first position
local static_iface = {}
-- Create a new context
local function context_new ()
local ctx = {}
ctx.luaname = 'Module:Params' --[[ or `frame:getTitle()` ]]--
ctx.iterfunc = pairs
ctx.sorttype = 0
ctx.firstposonly = static_iface
ctx.n_available = maxfill
return ctx
end
-- Move to the next action within the user-given list
local function context_iterate (ctx, n_forward)
local nextfn
if ctx.pipe[n_forward] ~= nil then
nextfn = ctx.pipe[n_forward]:match'^%s*(.*%S)'
end
if nextfn == nil then error(ctx.luaname ..
': You must specify a function to call', 0) end
if library[nextfn] == nil then
if ctx.firstposonly[nextfn] == nil then error(ctx.luaname ..
': The function ‘' .. nextfn .. '’ does not exist', 0)
else error(ctx.luaname .. ': The ‘' .. nextfn ..
'’ directive can only appear in first position', 0)
end
end
remove_numerical_keys(ctx.pipe, 1, n_forward)
return library[nextfn]
end
-- Main loop
local function main_loop (ctx, start_with)
local fn = start_with
repeat fn = fn(ctx) until not fn
end
-- Parse user arguments of type `...|[let]|[...][number of additional
-- parameters]|[parameter 1]|[parameter 2]|[...]`
local function parse_child_args (src, start_from, append_after)
local names
local tmp
local dest = {}
local pin = start_from
if src[pin] ~= nil and src[pin]:match'^%s*let%s*$' then
names = {}
repeat
tmp = src[pin + 1] or ''
names[tonumber(tmp) or tmp:match'^%s*(.-)%s*$' or ''] =
src[pin + 2]
pin = pin + 3
until src[pin] == nil or not src[pin]:match'^%s*let%s*$'
end
tmp = tonumber(src[pin])
if tmp ~= nil then
if tmp < 0 then tmp = -1 end
local shf = append_after - pin
for idx = pin + 1, pin + tmp do dest[idx + shf] = src[idx] end
pin = pin + tmp + 1
end
if names ~= nil then
for key, val in pairs(names) do dest[key] = val end
end
return dest, pin
end
-- Parse the arguments of some of the `mapping_*` and `renaming_*` class of
-- modifiers
local function parse_callback_args (src, n_skip, default_style)
local style
local shf
local tmp = src[n_skip + 1]
if tmp ~= nil then style = mapping_styles[tmp:match'^%s*(.-)%s*$'] end
if style == nil then
style = default_style
shf = n_skip - 1
else shf = n_skip end
local n_exist = style[3]
local karg = style[4]
local varg = style[5]
tmp = style[6]
if tmp > -1 then
tmp = src[tmp + shf]
karg = tonumber(tmp)
if karg == nil then karg = tmp:match'^%s*(.-)%s*$'
else n_exist = math.max(n_exist, karg) end
end
tmp = style[7]
if tmp > -1 then
tmp = src[tmp + shf]
varg = tonumber(tmp)
if varg == nil then varg = tmp:match'^%s*(.-)%s*$'
else n_exist = math.max(n_exist, varg) end
end
local dest, nargs = parse_child_args(src, style[2] + shf, n_exist)
tmp = style[1]
if (tmp == 3 or tmp == 2) and dest[karg] ~= nil then
tmp = tmp - 2 end
if (tmp == 3 or tmp == 1) and dest[varg] ~= nil then
tmp = tmp - 1 end
return dest, nargs, tmp, karg, varg
end
-- Parse the arguments of some of the `mapping_*` and `renaming_*` class of
-- modifiers
local function parse_replace_args (opts, fname)
if opts[1] == nil then error(ctx.luaname ..
', ‘' .. fname .. '’: No pattern string was given', 0) end
if opts[2] == nil then error(ctx.luaname ..
', ‘' .. fname .. '’: No replacement string was given', 0) end
local ptn = opts[1]
local repl = opts[2]
local argc = 3
local nmax = tonumber(opts[3])
if nmax ~= nil or (opts[3] or ''):match'^%s*$' ~= nil then argc = 4 end
local flg = opts[argc]
if flg ~= nil then flg = mkeywords[flg:match'^%s*(.-)%s*$'] end
if flg == 0 then flg = nil elseif flg ~= nil then argc = argc + 1 end
return ptn, repl, nmax, flg == 3, argc, (nmax ~= nil and nmax < 1) or
(flg == 3 and ptn == repl)
end
-- Parse the arguments of the `with_*_matching` class of modifiers
local function parse_pattern_args (ctx, fname)
local state = 0
local cnt = 1
local keyw
local nptns = 0
local ptns = {}
for _, val in ipairs(ctx.pipe) do
if state == 0 then
nptns = nptns + 1
ptns[nptns] = { val, false, false }
state = -1
else
keyw = val:match'^%s*(.*%S)'
if keyw == nil or mkeywords[keyw] == nil or (
state > 0 and mkeywords[keyw] > 0
) then break
else
state = mkeywords[keyw]
if state > 1 then ptns[nptns][2] = true end
if state == 3 then ptns[nptns][3] = true end
end
end
cnt = cnt + 1
end
if state == 0 then error(ctx.luaname .. ', ‘' .. fname ..
'’: No pattern was given', 0) end
return ptns, cnt
end
-- Map parameters' values using a custom callback and a referenced table
local value_maps = {
[0] = function (tbl, margs, karg, varg, fn)
for key in pairs(tbl) do tbl[key] = fn() end
end,
[1] = function (tbl, margs, karg, varg, fn)
for key, val in pairs(tbl) do
margs[varg] = val
tbl[key] = fn()
end
end,
[2] = function (tbl, margs, karg, varg, fn)
for key in pairs(tbl) do
margs[karg] = key
tbl[key] = fn()
end
end,
[3] = function (tbl, margs, karg, varg, fn)
for key, val in pairs(tbl) do
margs[karg] = key
margs[varg] = val
tbl[key] = fn()
end
end
}
-- Private table for `map_names()`
local name_thieves_maps = {
[0] = function (cache, tbl, rargs, karg, varg, fn)
for key, val in pairs(tbl) do
steal_if_renamed(val, tbl, key, cache, fn())
end
end,
[1] = function (cache, tbl, rargs, karg, varg, fn)
for key, val in pairs(tbl) do
rargs[varg] = val
steal_if_renamed(val, tbl, key, cache, fn())
end
end,
[2] = function (cache, tbl, rargs, karg, varg, fn)
for key, val in pairs(tbl) do
rargs[karg] = key
steal_if_renamed(val, tbl, key, cache, fn())
end
end,
[3] = function (cache, tbl, rargs, karg, varg, fn)
for key, val in pairs(tbl) do
rargs[karg] = key
rargs[varg] = val
steal_if_renamed(val, tbl, key, cache, fn())
end
end
}
-- Map parameters' names using a custom callback and a referenced table
local function map_names (tbl, rargs, karg, varg, looptype, fn)
local cache = {}
name_thieves_maps[looptype](cache, tbl, rargs, karg, varg, fn)
for key, val in pairs(cache) do tbl[key] = val end
end
-- Return a new table that contains `src` regrouped according to the numerical
-- suffixes in its keys
local function make_groups (src)
-- NOTE: `src` might be the original metatable!
local tmp
local prefix
local gid
local groups = {}
for key, val in pairs(src) do
-- `key` must only be a string or a number...
gid = tonumber(key)
if gid == nil then
prefix, gid = key:match'^%s*(.-)%s*(%-?%d*)%s*$'
gid = tonumber(gid) or ''
else prefix = '' end
if groups[gid] == nil then groups[gid] = {} end
tmp = tonumber(prefix)
if tmp ~= nil then
if tmp < 1 then prefix = tmp - 1 else prefix = tmp end
end
groups[gid][prefix] = val
end
return groups
end
-- Concatenate the numerical keys from the table of parameters to the numerical
-- keys from the table of options; non-numerical keys from the table of options
-- will prevail over colliding non-numerical keys from the table of parameters
local function concat_params (ctx)
local tbl = ctx.params
local size = table.maxn(ctx.pipe)
local retval = {}
if ctx.subset == 1 then
-- We need only the sequence
for key, val in ipairs(tbl) do retval[key + size] = val end
else
if ctx.subset == -1 then
for key, val in ipairs(tbl) do tbl[key] = nil end
end
for key, val in pairs(tbl) do
if type(key) == 'number' then retval[key + size] = val
else retval[key] = val end
end
end
for key, val in pairs(ctx.pipe) do retval[key] = val end
return retval
end
-- Flush the parameters by calling a custom function for each value (after this
-- function has been invoked `ctx.params` will be no longer usable)
local function flush_params (ctx, fn)
local tbl = ctx.params
if ctx.subset == 1 then
for key, val in ipairs(tbl) do fn(key, val) end
return
end
if ctx.subset == -1 then
for key, val in ipairs(tbl) do tbl[key] = nil end
end
if ctx.sorttype > 0 then
local nums = {}
local words = {}
local nn = 0
local nw = 0
for key, val in pairs(tbl) do
if type(key) == 'number' then
nn = nn + 1
nums[nn] = key
else
nw = nw + 1
words[nw] = key
end
end
table.sort(nums)
table.sort(words, natural_sort)
if ctx.sorttype == 2 then
for idx = 1, nw do fn(words[idx], tbl[words[idx]]) end
for idx = 1, nn do fn(nums[idx], tbl[nums[idx]]) end
return
end
for idx = 1, nn do fn(nums[idx], tbl[nums[idx]]) end
for idx = 1, nw do fn(words[idx], tbl[words[idx]]) end
return
end
if ctx.subset ~= -1 then
for key, val in ipairs(tbl) do
fn(key, val)
tbl[key] = nil
end
end
for key, val in pairs(tbl) do fn(key, val) end
end
--[[ Modifiers ]]--
-----------------------------
-- Syntax: #invoke:params|sequential|pipe to
library.sequential = function (ctx)
if ctx.subset == -1 then error(ctx.luaname ..
': The two directives ‘non-sequential’ and ‘sequential’ are in contradiction with each other', 0) end
if ctx.sorttype > 0 then error(ctx.luaname ..
': The ‘all_sorted’ and ‘reassorted’ directives are redundant when followed by ‘sequential’', 0) end
ctx.iterfunc = ipairs
ctx.subset = 1
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|non-sequential|pipe to
library['non-sequential'] = function (ctx)
if ctx.subset == 1 then error(ctx.luaname ..
': The two directives ‘sequential’ and ‘non-sequential’ are in contradiction with each other', 0) end
ctx.iterfunc = pairs
ctx.subset = -1
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|all_sorted|pipe to
library.all_sorted = function (ctx)
if ctx.subset == 1 then error(ctx.luaname ..
': The ‘all_sorted’ directive is redundant after ‘sequential’', 0) end
if ctx.sorttype == 2 then error(ctx.luaname ..
': The two directives ‘reassorted’ and ‘sequential’ are in contradiction with each other', 0) end
ctx.sorttype = 1
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|reassorted|pipe to
library.reassorted = function (ctx)
if ctx.subset == 1 then error(ctx.luaname ..
': The ‘reassorted’ directive is redundant after ‘sequential’', 0) end
if ctx.sorttype == 1 then error(ctx.luaname ..
': The two directives ‘sequential’ and ‘reassorted’ are in contradiction with each other', 0) end
ctx.sorttype = 2
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|setting|directives|...|pipe to
library.setting = function (ctx)
local opts = ctx.pipe
local cmd = opts[1]
if cmd ~= nil then
cmd = cmd:gsub('%s+', ''):gsub('/+', '/'):match'^/*(.*[^/])'
end
if cmd == nil then error(ctx.luaname ..
', ‘setting’: No directive was given', 0) end
local sep = string.byte('/')
local argc = 2
local dest = {}
local vname
local chr
for idx = 1, #cmd do
chr = cmd:byte(idx)
if chr == sep then
for key, val in ipairs(dest) do
ctx[val] = opts[argc]
dest[key] = nil
end
argc = argc + 1
else
vname = memoryslots[string.char(chr)]
if vname == nil then error(ctx.luaname ..
', ‘setting’: Unknown slot ‘' ..
string.char(chr) .. '’', 0) end
table.insert(dest, vname)
end
end
for key, val in ipairs(dest) do ctx[val] = opts[argc] end
return context_iterate(ctx, argc + 1)
end
-- Syntax: #invoke:params|squeezing|pipe to
library.squeezing = function (ctx)
local tbl = ctx.params
local store = {}
local indices = {}
local newlen = 0
for key, val in pairs(tbl) do
if type(key) == 'number' then
newlen = newlen + 1
indices[newlen] = key
store[key] = val
tbl[key] = nil
end
end
table.sort(indices)
for idx = 1, newlen do tbl[idx] = store[indices[idx]] end
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|filling_the_gaps|pipe to
library.filling_the_gaps = function (ctx)
local tbl = ctx.params
local nmin = 1
local nmax = nil
local nnums = -1
local tmp = {}
for key, val in pairs(tbl) do
if type(key) == 'number' then
if nmax == nil then
if key < nmin then nmin = key end
nmax = key
elseif key > nmax then nmax = key
elseif key < nmin then nmin = key end
nnums = nnums + 1
tmp[key] = val
end
end
if nmax ~= nil and nmax - nmin > nnums then
ctx.n_available = ctx.n_available + nmin + nnums - nmax
if ctx.n_available < 0 then error(ctx.luaname ..
', ‘filling_the_gaps’: It is possible to fill at most ' ..
tostring(maxfill) .. ' parameters', 0) end
for idx = nmin, nmax, 1 do tbl[idx] = '' end
for key, val in pairs(tmp) do tbl[key] = val end
end
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|clearing|pipe to
library.clearing = function (ctx)
local tbl = ctx.params
local numericals = {}
for key, val in pairs(tbl) do
if type(key) == 'number' then
numericals[key] = val
tbl[key] = nil
end
end
for key, val in ipairs(numericals) do tbl[key] = val end
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|cutting|left cut|right cut|pipe to
library.cutting = function (ctx)
local lcut = tonumber(ctx.pipe[1])
if lcut == nil then error(ctx.luaname ..
', ‘cutting’: Left cut must be a number', 0) end
local rcut = tonumber(ctx.pipe[2])
if rcut == nil then error(ctx.luaname ..
', ‘cutting’: Right cut must be a number', 0) end
local tbl = ctx.params
local len = #tbl
if lcut < 0 then lcut = len + lcut end
if rcut < 0 then rcut = len + rcut end
local tot = lcut + rcut
if tot > 0 then
local cache = {}
if tot >= len then
for key in ipairs(tbl) do tbl[key] = nil end
tot = len
else
for idx = len - rcut + 1, len, 1 do tbl[idx] = nil end
for idx = 1, lcut, 1 do tbl[idx] = nil end
end
for key, val in pairs(tbl) do
if type(key) == 'number' and key > 0 then
if key > len then cache[key - tot] = val
else cache[key - lcut] = val end
tbl[key] = nil
end
end
for key, val in pairs(cache) do tbl[key] = val end
end
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|cropping|left crop|right crop|pipe to
library.cropping = function (ctx)
local lcut = tonumber(ctx.pipe[1])
if lcut == nil then error(ctx.luaname ..
', ‘cropping’: Left crop must be a number', 0) end
local rcut = tonumber(ctx.pipe[2])
if rcut == nil then error(ctx.luaname ..
', ‘cropping’: Right crop must be a number', 0) end
local tbl = ctx.params
local nmin
local nmax
for key in pairs(tbl) do
if type(key) == 'number' then
if nmin == nil then
nmin = key
nmax = key
elseif key > nmax then nmax = key
elseif key < nmin then nmin = key end
end
end
if nmin ~= nil then
local len = nmax - nmin + 1
if lcut < 0 then lcut = len + lcut end
if rcut < 0 then rcut = len + rcut end
if lcut + rcut - len > -1 then
for key in pairs(tbl) do
if type(key) == 'number' then tbl[key] = nil end
end
elseif lcut + rcut > 0 then
for idx = nmax - rcut + 1, nmax do tbl[idx] = nil end
for idx = nmin, nmin + lcut - 1 do tbl[idx] = nil end
local lshift = nmin + lcut - 1
if lshift > 0 then
for idx = lshift + 1, nmax, 1 do
tbl[idx - lshift] = tbl[idx]
tbl[idx] = nil
end
end
end
end
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|purging|start offset|length|pipe to
library.purging = function (ctx)
local idx = tonumber(ctx.pipe[1])
if idx == nil then error(ctx.luaname ..
', ‘purging’: Start offset must be a number', 0) end
local len = tonumber(ctx.pipe[2])
if len == nil then error(ctx.luaname ..
', ‘purging’: Length must be a number', 0) end
local tbl = ctx.params
if len < 1 then
len = len + table.maxn(tbl)
if idx > len then return context_iterate(ctx, 3) end
len = len - idx + 1
end
ctx.params = copy_table_reduced(tbl, idx, len)
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|backpurging|start offset|length|pipe to
library.backpurging = function (ctx)
local last = tonumber(ctx.pipe[1])
if last == nil then error(ctx.luaname ..
', ‘backpurging’: Start offset must be a number', 0) end
local len = tonumber(ctx.pipe[2])
if len == nil then error(ctx.luaname ..
', ‘backpurging’: Length must be a number', 0) end
local idx
local tbl = ctx.params
if len > 0 then
idx = last - len + 1
else
for key in pairs(tbl) do
if type(key) == 'number' and (idx == nil or
key < idx) then idx = key end
end
if idx == nil then return context_iterate(ctx, 3) end
idx = idx - len
if last < idx then return context_iterate(ctx, 3) end
len = last - idx + 1
end
ctx.params = copy_table_reduced(ctx.params, idx, len)
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|rotating|pipe to
library.rotating = function (ctx)
local tbl = ctx.params
local numericals = {}
local nmax = 0
for key, val in pairs(tbl) do
if type(key) == 'number' then
numericals[key] = val
tbl[key] = nil
if key > nmax then nmax = key end
end
end
for key, val in pairs(numericals) do tbl[nmax - key + 1] = val end
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|pivoting|pipe to
--[[
library.pivoting = function (ctx)
local tbl = ctx.params
local shift = #tbl + 1
if shift < 2 then return library.rotating(ctx) end
local numericals = {}
for key, val in pairs(tbl) do
if type(key) == 'number' then
numericals[key] = val
tbl[key] = nil
end
end
for key, val in pairs(numericals) do tbl[shift - key] = val end
return context_iterate(ctx, 1)
end
]]--
-- Syntax: #invoke:params|mirroring|pipe to
--[[
library.mirroring = function (ctx)
local tbl = ctx.params
local numericals = {}
local nmax
local nmin
for key, val in pairs(tbl) do
if type(key) == 'number' then
numericals[key] = val
tbl[key] = nil
if nmax == nil then
nmax = key
nmin = key
elseif key > nmax then nmax = key
elseif key < nmin then nmin = key end
end
end
for key, val in pairs(numericals) do tbl[nmax + nmin - key] = val end
return context_iterate(ctx, 1)
end
]]--
-- Syntax: #invoke:params|swapping|pipe to
--[[
library.swapping = function (ctx)
local tbl = ctx.params
local cache = {}
local nsize = 0
local tmp
for key in pairs(tbl) do
if type(key) == 'number' then
nsize = nsize + 1
cache[nsize] = key
end
end
table.sort(cache)
for idx = math.floor(nsize / 2), 1, -1 do
tmp = tbl[cache[idx] ]
tbl[cache[idx] ] = tbl[cache[nsize - idx + 1] ]
tbl[cache[nsize - idx + 1] ] = tmp
end
return context_iterate(ctx, 1)
end
]]--
-- Syntax: #invoke:params|sorting_sequential_values|[criterion]|pipe to
library.sorting_sequential_values = function (ctx)
local sortfn
if ctx.pipe[1] ~= nil then sortfn = sortfunctions[ctx.pipe[1]] end
if sortfn then table.sort(ctx.params, sortfn)
else table.sort(ctx.params) end -- i.e. either `false` or `nil`
if sortfn == nil then return context_iterate(ctx, 1) end
return context_iterate(ctx, 2)
end
-- Syntax: #invoke:params|inserting|position|how many|...|pipe to
--[[
library.inserting = function (ctx)
-- NOTE: `ctx.params` might be the original metatable! As a modifier,
-- this function MUST create a copy of it before returning
local idx = tonumber(ctx.pipe[1])
if idx == nil then error(ctx.luaname ..
', ‘inserting’: Position must be a number', 0) end
local len = tonumber(ctx.pipe[2])
if len == nil or len < 1 then error(ctx.luaname ..
', ‘inserting’: The amount must be a number greater than zero', 0) end
local opts = ctx.pipe
local tbl = copy_table_expanded(ctx.params, idx, len)
for key = idx, idx + len - 1 do tbl[key] = opts[key - idx + 3] end
ctx.params = tbl
return context_iterate(ctx, len + 3)
end
]]--
-- Syntax: #invoke:params|imposing|name|value|pipe to
library.imposing = function (ctx)
if ctx.pipe[1] == nil then error(ctx.luaname ..
', ‘imposing’: Missing parameter name to impose', 0) end
local key = ctx.pipe[1]:match'^%s*(.-)%s*$'
ctx.params[tonumber(key) or key] = ctx.pipe[2]
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|providing|name|value|pipe to
library.providing = function (ctx)
if ctx.pipe[1] == nil then error(ctx.luaname ..
', ‘providing’: Missing parameter name to provide', 0) end
local key = ctx.pipe[1]:match'^%s*(.-)%s*$'
key = tonumber(key) or key
if ctx.params[key] == nil then ctx.params[key] = ctx.pipe[2] end
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|discarding|name|[how many]|pipe to
library.discarding = function (ctx)
if ctx.pipe[1] == nil then error(ctx.luaname ..
', ‘discarding’: Missing parameter name to discard', 0) end
local key = ctx.pipe[1]
local len = tonumber(ctx.pipe[2])
if len == nil then
ctx.params[tonumber(key) or key:match'^%s*(.-)%s*$'] = nil
return context_iterate(ctx, 2)
end
key = tonumber(key)
if key == nil then error(ctx.luaname ..
', ‘discarding’: A range was provided, but the initial parameter name is not numerical', 0) end
if len < 1 then error(ctx.luaname ..
', ‘discarding’: A range can only be a number greater than zero', 0) end
for idx = key, key + len - 1 do ctx.params[idx] = nil end
return context_iterate(ctx, 3)
end
-- Syntax: #invoke:params|with_name_matching|target 1|[plain flag 1]|[or]
-- |[target 2]|[plain flag 2]|[or]|[...]|[target N]|[plain flag
-- N]|pipe to
library.with_name_matching = function (ctx)
local tbl = ctx.params
local targets, argc = parse_pattern_args(ctx, targets,
'with_name_matching')
local nomatch
for key in pairs(tbl) do
nomatch = true
for _, ptn in ipairs(targets) do
if not ptn[3] then
if string.find(key, ptn[1], 1, ptn[2]) then
nomatch = false
break
end
elseif key == ptn[1] then
nomatch = false
break
end
end
if nomatch then tbl[key] = nil end
end
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|with_name_not_matching|target 1|[plain flag 1]
-- |[and]|[target 2]|[plain flag 2]|[and]|[...]|[target N]|[plain
-- flag N]|pipe to
library.with_name_not_matching = function (ctx)
local tbl = ctx.params
local targets, argc = parse_pattern_args(ctx, targets,
'with_name_not_matching')
local yesmatch
for key in pairs(tbl) do
yesmatch = true
for _, ptn in ipairs(targets) do
if ptn[3] then
if key ~= ptn[1] then
yesmatch = false
break
end
elseif not string.find(key, ptn[1], 1, ptn[2]) then
yesmatch = false
break
end
end
if yesmatch then tbl[key] = nil end
end
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|with_value_matching|target 1|[plain flag 1]|[or]
-- |[target 2]|[plain flag 2]|[or]|[...]|[target N]|[plain flag
-- N]|pipe to
library.with_value_matching = function (ctx)
local tbl = ctx.params
local targets, argc = parse_pattern_args(ctx, targets,
'with_value_matching')
local nomatch
for key, val in pairs(tbl) do
nomatch = true
for _, ptn in ipairs(targets) do
if ptn[3] then
if val == ptn[1] then
nomatch = false
break
end
elseif string.find(val, ptn[1], 1, ptn[2]) then
nomatch = false
break
end
end
if nomatch then tbl[key] = nil end
end
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|with_value_not_matching|target 1|[plain flag 1]
-- |[and]|[target 2]|[plain flag 2]|[and]|[...]|[target N]|[plain
-- flag N]|pipe to
library.with_value_not_matching = function (ctx)
local tbl = ctx.params
local targets, argc = parse_pattern_args(ctx, targets,
'with_value_not_matching')
local yesmatch
for key, val in pairs(tbl) do
yesmatch = true
for _, ptn in ipairs(targets) do
if ptn[3] then
if val ~= ptn[1] then
yesmatch = false
break
end
elseif not string.find(val, ptn[1], 1, ptn[2]) then
yesmatch = false
break
end
end
if yesmatch then tbl[key] = nil end
end
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|trimming_values|pipe to
library.trimming_values = function (ctx)
local tbl = ctx.params
for key, val in pairs(tbl) do tbl[key] = val:match'^%s*(.-)%s*$' end
return context_iterate(ctx, 1)
end
-- Syntax: #invoke:params|mapping_by_calling|template name|[call
-- style]|[let]|[...][number of additional parameters]|[parameter
-- 1]|[parameter 2]|[...]|[parameter N]|pipe to
library.mapping_by_calling = function (ctx)
local opts = ctx.pipe
local tname
if opts[1] ~= nil then tname = opts[1]:match'^%s*(.*%S)' end
if tname == nil then error(ctx.luaname ..
', ‘mapping_by_calling’: No template name was provided', 0) end
local margs, argc, looptype, karg, varg = parse_callback_args(opts, 1,
mapping_styles.values_only)
local model = { title = tname, args = margs }
value_maps[looptype](ctx.params, margs, karg, varg, function ()
return ctx.frame:expandTemplate(model)
end)
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|mapping_by_invoking|module name|function
-- name|[call style]|[let]|[...]|[number of additional
-- arguments]|[argument 1]|[argument 2]|[...]|[argument N]|pipe to
library.mapping_by_invoking = function (ctx)
local opts = ctx.pipe
local mname
local fname
if opts[1] ~= nil then mname = opts[1]:match'^%s*(.*%S)' end
if mname == nil then error(ctx.luaname ..
', ‘mapping_by_invoking’: No module name was provided', 0) end
if opts[2] ~= nil then fname = opts[2]:match'^%s*(.*%S)' end
if fname == nil then error(ctx.luaname ..
', ‘mapping_by_invoking’: No function name was provided', 0) end
local margs, argc, looptype, karg, varg = parse_callback_args(opts, 2,
mapping_styles.values_only)
local model = { title = 'Module:' .. mname, args = margs }
local mfunc = require(model.title)[fname]
if mfunc == nil then error(ctx.luaname ..
', ‘mapping_by_invoking’: The function ‘' .. fname ..
'’ does not exist', 0) end
value_maps[looptype](ctx.params, margs, karg, varg, function ()
return mfunc(ctx.frame:newChild(model))
end)
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|mapping_by_magic|parser function|[call
-- style]|[let]|[...][number of additional arguments]|[argument
-- 1]|[argument 2]|[...]|[argument N]|pipe to
library.mapping_by_magic = function (ctx)
local opts = ctx.pipe
local magic
if opts[1] ~= nil then magic = opts[1]:match'^%s*(.*%S)' end
if magic == nil then error(ctx.luaname ..
', ‘mapping_by_magic’: No parser function was provided', 0) end
local margs, argc, looptype, karg, varg = parse_callback_args(opts, 1,
mapping_styles.values_only)
value_maps[looptype](ctx.params, margs, karg, varg, function ()
return ctx.frame:callParserFunction(magic, margs)
end)
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|mapping_by_replacing|target|replace|[count]|[plain
-- flag]|pipe to
library.mapping_by_replacing = function (ctx)
local ptn, repl, nmax, is_strict, argc, die =
parse_replace_args(ctx.pipe, 'mapping_by_replacing')
if die then return context_iterate(ctx, argc) end
local tbl = ctx.params
if is_strict then
for key, val in pairs(tbl) do
if val == ptn then tbl[key] = repl end
end
else
if flg == 2 then
-- Copied from Module:String's `str._escapePattern()`
ptn = ptn:gsub('[%(%)%.%%%+%-%*%?%[%^%$%]]', '%%%0')
end
for key, val in pairs(tbl) do
tbl[key] = val:gsub(ptn, repl, nmax)
end
end
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|renaming_by_calling|template name|[call
-- style]|[let]|[...][number of additional parameters]|[parameter
-- 1]|[parameter 2]|[...]|[parameter N]|pipe to
library.renaming_by_calling = function (ctx)
local opts = ctx.pipe
local tname
if opts[1] ~= nil then tname = opts[1]:match'^%s*(.*%S)' end
if tname == nil then error(ctx.luaname ..
', ‘renaming_by_calling’: No template name was provided', 0) end
local rargs, argc, looptype, karg, varg = parse_callback_args(opts, 1,
mapping_styles.names_only)
local model = { title = tname, args = rargs }
map_names(ctx.params, rargs, karg, varg, looptype, function ()
return ctx.frame:expandTemplate(model)
end)
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|renaming_by_invoking|module name|function
-- name|[call style]|[let]|[...]|[number of additional
-- arguments]|[argument 1]|[argument 2]|[...]|[argument N]|pipe to
library.renaming_by_invoking = function (ctx)
local opts = ctx.pipe
local mname
local fname
if opts[1] ~= nil then mname = opts[1]:match'^%s*(.*%S)' end
if mname == nil then error(ctx.luaname ..
', ‘renaming_by_invoking’: No module name was provided', 0) end
if opts[2] ~= nil then fname = opts[2]:match'^%s*(.*%S)' end
if fname == nil then error(ctx.luaname ..
', ‘renaming_by_invoking’: No function name was provided', 0) end
local rargs, argc, looptype, karg, varg = parse_callback_args(opts, 2,
mapping_styles.names_only)
local model = { title = 'Module:' .. mname, args = rargs }
local mfunc = require(model.title)[fname]
if mfunc == nil then error(ctx.luaname ..
', ‘renaming_by_invoking’: The function ‘' .. fname ..
'’ does not exist', 0) end
map_names(ctx.params, rargs, karg, varg, looptype, function ()
return mfunc(ctx.frame:newChild(model))
end)
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|renaming_by_magic|parser function|[call
-- style]|[let]|[...][number of additional arguments]|[argument
-- 1]|[argument 2]|[...]|[argument N]|pipe to
library.renaming_by_magic = function (ctx)
local opts = ctx.pipe
local magic
if opts[1] ~= nil then magic = opts[1]:match'^%s*(.*%S)' end
if magic == nil then error(ctx.luaname ..
', ‘renaming_by_magic’: No parser function was provided', 0) end
local rargs, argc, looptype, karg, varg = parse_callback_args(opts, 1,
mapping_styles.names_only)
map_names(ctx.params, rargs, karg, varg, looptype, function ()
return ctx.frame:callParserFunction(magic, rargs)
end)
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|renaming_by_replacing|target|replace|[count]|[plain
-- flag]|pipe to
library.renaming_by_replacing = function (ctx)
local ptn, repl, nmax, is_strict, argc, die =
parse_replace_args(ctx.pipe, 'renaming_by_replacing')
if die then return context_iterate(ctx, argc) end
local tbl = ctx.params
if is_strict then
local key = tonumber(ptn) or ptn:match'^%s*(.-)%s*$'
local val = tbl[key]
tbl[key] = nil
tbl[tonumber(repl) or repl:match'^%s*(.-)%s*$'] = val
else
if flg == 2 then
-- Copied from Module:String's `str._escapePattern()`
ptn = ptn:gsub('[%(%)%.%%%+%-%*%?%[%^%$%]]', '%%%0')
end
local cache = {}
for key, val in pairs(tbl) do
steal_if_renamed(val, tbl, key, cache,
tostring(key):gsub(ptn, repl, nmax))
end
for key, val in pairs(cache) do tbl[key] = val end
end
return context_iterate(ctx, argc)
end
-- Syntax: #invoke:params|grouping_by_calling|template
-- name|[let]|[...]|[number of additional arguments]|[argument
-- 1]|[argument 2]|[...]|[argument N]|pipe to
library.grouping_by_calling = function (ctx)
-- NOTE: `ctx.params` might be the original metatable! As a modifier,
-- this function MUST create a copy of it before returning
local opts = ctx.pipe
local tmp
if opts[1] ~= nil then tmp = opts[1]:match'^%s*(.*%S)' end
if tmp == nil then error(ctx.luaname ..
', ‘grouping_by_calling’: No template name was provided', 0) end
local model = { title = tmp }
local tmp, argc = parse_child_args(opts, 2, 0)
local gargs = {}
for key, val in pairs(tmp) do
if type(key) == 'number' and key < 1 then gargs[key - 1] = val
else gargs[key] = val end
end
local groups = make_groups(ctx.params)
for gid, group in pairs(groups) do
for key, val in pairs(gargs) do group[key] = val end
group[0] = gid
model.args = group
groups[gid] = ctx.frame:expandTemplate(model)
end
ctx.params = groups
return context_iterate(ctx, argc)
end
--[[ Functions ]]--
-----------------------------
-- Syntax: #invoke:params|count
library.count = function (ctx)
-- NOTE: `ctx.pipe` and `ctx.params` might be the original metatables!
local retval = 0
for _ in ctx.iterfunc(ctx.params) do retval = retval + 1 end
if ctx.subset == -1 then retval = retval - #ctx.params end
ctx.text = retval
return false
end
-- Syntax: #invoke:args|concat_and_call|template name|[prepend 1]|[prepend 2]
-- |[...]|[item n]|[named item 1=value 1]|[...]|[named item n=value
-- n]|[...]
library.concat_and_call = function (ctx)
-- NOTE: `ctx.params` might be the original metatable!
local opts = ctx.pipe
local tname
if opts[1] ~= nil then tname = opts[1]:match'^%s*(.*%S)' end
if tname == nil then error(ctx.luaname ..
', ‘concat_and_call’: No template name was provided', 0) end
remove_numerical_keys(opts, 1, 1)
ctx.text = ctx.frame:expandTemplate{
title = tname,
args = concat_params(ctx)
}
return false
end
-- Syntax: #invoke:args|concat_and_invoke|module name|function name|[prepend
-- 1]|[prepend 2]|[...]|[item n]|[named item 1=value 1]|[...]|[named
-- item n=value n]|[...]
library.concat_and_invoke = function (ctx)
-- NOTE: `ctx.params` might be the original metatable!
local opts = ctx.pipe
local mname
local fname
if opts[1] ~= nil then mname = opts[1]:match'^%s*(.*%S)' end
if mname == nil then error(ctx.luaname ..
', ‘concat_and_invoke’: No module name was provided', 0) end
if opts[2] ~= nil then fname = opts[2]:match'^%s*(.*%S)' end
if fname == nil then error(ctx.luaname ..
', ‘concat_and_invoke’: No function name was provided', 0) end
remove_numerical_keys(opts, 1, 2)
local mfunc = require('Module:' .. mname)[fname]
if mfunc == nil then error(ctx.luaname ..
', ‘concat_and_invoke’: The function ‘' .. fname ..
'’ does not exist', 0) end
ctx.text = mfunc(ctx.frame:newChild{
title = 'Module:' .. fname,
args = concat_params(ctx)
})
return false
end
-- Syntax: #invoke:args|concat_and_magic|parser function|[prepend 1]|[prepend
-- 2]|[...]|[item n]|[named item 1=value 1]|[...]|[named item n=
-- value n]|[...]
library.concat_and_magic = function (ctx)
-- NOTE: `ctx.params` might be the original metatable!
local opts = ctx.pipe
local magic
if opts[1] ~= nil then magic = opts[1]:match'^%s*(.*%S)' end
if magic == nil then error(ctx.luaname ..
', ‘concat_and_magic’: No parser function was provided', 0) end
remove_numerical_keys(opts, 1, 1)
ctx.text = ctx.frame:callParserFunction(magic, concat_params(ctx))
return false
end
-- Syntax: #invoke:params|value_of|parameter name
library.value_of = function (ctx)
-- NOTE: `ctx.pipe` and `ctx.params` might be the original metatables!
local opts = ctx.pipe
local kstr
if opts[1] ~= nil then kstr = opts[1]:match'^%s*(.*%S)' end
if kstr == nil then error(ctx.luaname ..
', ‘value_of’: No parameter name was provided', 0) end
local knum = tonumber(kstr)
local len = #ctx.params
local val = ctx.params[knum or kstr]
if val ~= nil and (
ctx.subset ~= -1 or knum == nil or knum > len or knum < 1
) and (
ctx.subset ~= 1 or (knum ~= nil and knum <= len and knum > 0)
) then
ctx.text = (ctx.header or '') .. val .. (ctx.footer or '')
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|list
library.list = function (ctx)
-- NOTE: `ctx.pipe` might be the original metatable!
local kvs = ctx.pairsep or ''
local pps = ctx.itersep or ''
local ret = {}
local nss = 0
flush_params(
ctx,
function (key, val)
ret[nss + 1] = pps
ret[nss + 2] = key
ret[nss + 3] = kvs
ret[nss + 4] = val
nss = nss + 4
end
)
if nss > 0 then
if nss > 4 and ctx.lastsep ~= nil then
ret[nss - 3] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|list_values
library.list_values = function (ctx)
-- NOTE: `ctx.pipe` might be the original metatable!
local pps = ctx.itersep or ''
local ret = {}
local nss = 0
flush_params(
ctx,
function (key, val)
ret[nss + 1] = pps
ret[nss + 2] = val
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|for_each|wikitext
library.for_each = function (ctx)
-- NOTE: `ctx.pipe` might be the original metatable!
local txt = ctx.pipe[1] or ''
local pps = ctx.itersep or ''
local ret = {}
local nss = 0
flush_params(
ctx,
function (key, val)
ret[nss + 1] = pps
ret[nss + 2] = txt:gsub('%$#', key):gsub('%$@', val)
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|call_for_each|template name|[append 1]|[append 2]
-- |[...]|[append n]|[named param 1=value 1]|[...]|[named param
-- n=value n]|[...]
library.call_for_each = function (ctx)
local opts = ctx.pipe
local tname
if opts[1] ~= nil then tname = opts[1]:match'^%s*(.*%S)' end
if tname == nil then error(ctx.luaname ..
', ‘call_for_each’: No template name was provided', 0) end
local model = { title = tname, args = opts }
local ccs = ctx.itersep or ''
local ret = {}
local nss = 0
table.insert(opts, 1, true)
flush_params(
ctx,
function (key, val)
opts[1] = key
opts[2] = val
ret[nss + 1] = ccs
ret[nss + 2] = ctx.frame:expandTemplate(model)
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|invoke_for_each|module name|module function|[append
-- 1]|[append 2]|[...]|[append n]|[named param 1=value 1]|[...]
-- |[named param n=value n]|[...]
library.invoke_for_each = function (ctx)
local opts = ctx.pipe
local mname
local fname
if opts[1] ~= nil then mname = opts[1]:match'^%s*(.*%S)' end
if mname == nil then error(ctx.luaname ..
', ‘invoke_for_each’: No module name was provided', 0) end
if opts[2] ~= nil then fname = opts[2]:match'^%s*(.*%S)' end
if fname == nil then error(ctx.luaname ..
', ‘invoke_for_each’: No function name was provided', 0) end
local model = { title = 'Module:' .. mname, args = opts }
local mfunc = require(model.title)[fname]
local ccs = ctx.itersep or ''
local ret = {}
local nss = 0
flush_params(
ctx,
function (key, val)
opts[1] = key
opts[2] = val
ret[nss + 1] = ccs
ret[nss + 2] = mfunc(ctx.frame:newChild(model))
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|magic_for_each|parser function|[append 1]|[append 2]
-- |[...]|[append n]|[named param 1=value 1]|[...]|[named param
-- n=value n]|[...]
library.magic_for_each = function (ctx)
local opts = ctx.pipe
local magic
if opts[1] ~= nil then magic = opts[1]:match'^%s*(.*%S)' end
if magic == nil then error(ctx.luaname ..
', ‘magic_for_each’: No parser function was provided', 0) end
local ccs = ctx.itersep or ''
local ret = {}
local nss = 0
table.insert(opts, 1, true)
flush_params(
ctx,
function (key, val)
opts[1] = key
opts[2] = val
ret[nss + 1] = ccs
ret[nss + 2] = ctx.frame:callParserFunction(magic,
opts)
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|call_for_each_value|template name|[append 1]|[append
-- 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param
-- n=value n]|[...]
library.call_for_each_value = function (ctx)
local opts = ctx.pipe
local tname
if opts[1] ~= nil then tname = opts[1]:match'^%s*(.*%S)' end
if tname == nil then error(ctx.luaname ..
', ‘call_for_each_value’: No template name was provided', 0) end
local model = { title = tname, args = opts }
local ccs = ctx.itersep or ''
local ret = {}
local nss = 0
flush_params(
ctx,
function (key, val)
opts[1] = val
ret[nss + 1] = ccs
ret[nss + 2] = ctx.frame:expandTemplate(model)
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|invoke_for_each_value|module name|[append 1]|[append
-- 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param
-- n=value n]|[...]
library.invoke_for_each_value = function (ctx)
local opts = ctx.pipe
local mname
local fname
if opts[1] ~= nil then mname = opts[1]:match'^%s*(.*%S)' end
if mname == nil then error(ctx.luaname ..
', ‘invoke_for_each_value’: No module name was provided', 0) end
if opts[2] ~= nil then fname = opts[2]:match'^%s*(.*%S)' end
if fname == nil then error(ctx.luaname ..
', ‘invoke_for_each_value’: No function name was provided', 0) end
local model = { title = 'Module:' .. mname, args = opts }
local mfunc = require(model.title)[fname]
local ccs = ctx.itersep or ''
local ret = {}
local nss = 0
remove_numerical_keys(opts, 1, 1)
flush_params(
ctx,
function (key, val)
opts[1] = val
ret[nss + 1] = ccs
ret[nss + 2] = mfunc(ctx.frame:newChild(model))
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|magic_for_each_value|parser function|[append 1]
-- |[append 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named
-- param n=value n]|[...]
library.magic_for_each_value = function (ctx)
local opts = ctx.pipe
local magic
if opts[1] ~= nil then magic = opts[1]:match'^%s*(.*%S)' end
if magic == nil then error(ctx.luaname ..
', ‘magic_for_each_value’: No parser function was provided', 0) end
local ccs = ctx.itersep or ''
local ret = {}
local nss = 0
flush_params(
ctx,
function (key, val)
opts[1] = val
ret[nss + 1] = ccs
ret[nss + 2] = ctx.frame:callParserFunction(magic,
opts)
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
-- Syntax: #invoke:params|call_for_each_group|template name|[append 1]|[append
-- 2]|[...]|[append n]|[named param 1=value 1]|[...]|[named param
-- n=value n]|[...]
library.call_for_each_group = function (ctx)
-- NOTE: `ctx.pipe` and `ctx.params` might be the original metatables!
local opts = ctx.pipe
local tmp
if opts[1] ~= nil then tmp = opts[1]:match'^%s*(.*%S)' end
if tmp == nil then error(ctx.luaname ..
', ‘call_for_each_group’: No template name was provided', 0) end
local model = { title = tmp }
local ccs = ctx.itersep or ''
local nss = 0
local ret = {}
opts = {}
for key, val in pairs(ctx.pipe) do
if type(key) == 'number' then opts[key - 1] = val
else opts[key] = val end
end
ctx.pipe = opts
ctx.params = make_groups(ctx.params)
flush_params(
ctx,
function (gid, group)
for key, val in pairs(opts) do group[key] = val end
group[0] = gid
model.args = group
ret[nss + 1] = ccs
ret[nss + 2] = ctx.frame:expandTemplate(model)
nss = nss + 2
end
)
if nss > 0 then
if nss > 2 and ctx.lastsep ~= nil then
ret[nss - 1] = ctx.lastsep
end
ret[1] = ctx.header or ''
if ctx.footer ~= nil then ret[nss + 1] = ctx.footer end
ctx.text = table.concat(ret)
return false
end
ctx.text = ctx.ifngiven or ''
return false
end
--- ---
--- PUBLIC ENVIRONMENT ---
--- ________________________________ ---
--- ---
--[[ First-position-only modifiers ]]--
---------------------------------------
-- Syntax: #invoke:params|new|pipe to
--[[
static_iface.new = function (frame)
local ctx = context_new()
ctx.frame = frame:getParent()
ctx.pipe = copy_or_ref_table(frame.args, false)
ctx.params = {}
main_loop(ctx, context_iterate(ctx, 1))
return ctx.text
end
]]--
--[[ First-position-only functions ]]--
---------------------------------------
-- Syntax: #invoke:params|self
static_iface.self = function (frame)
return frame:getParent():getTitle()
end
--[[ Public metatable of functions ]]--
---------------------------------------
return setmetatable(static_iface, {
__index = function (iface, _fname_)
local ctx = context_new()
local fname = _fname_:match'^%s*(.*%S)'
if fname == nil then error(ctx.luaname ..
': You must specify a function to call', 0) end
if library[fname] == nil then error(ctx.luaname ..
': The function ‘' .. fname .. '’ does not exist', 0) end
local func = library[fname]
return function (frame)
ctx.frame = frame:getParent()
ctx.pipe = copy_or_ref_table(frame.args,
refpipe[fname])
ctx.params = copy_or_ref_table(ctx.frame.args,
refparams[fname])
main_loop(ctx, func)
return ctx.text
end
end
})